NETGEAR Wireless Digital Music Player Review

Average Reviews:

(More customer reviews)Now that I have this set up it does exactly what I wanted it to very well -- that is, in a wired network environment, it streams all the mp3 files that I have on my PC's hard drive through my traditional two-channel audio setup. It has a number of limitations: it doesn't support Internet radio, except for a paid service, and it doesn't support various rights-protected data formats. But it does do the one thing I bought it for extremely well: allowing me to enjoy my entire music collection in an organized, well catalogued way, through my home audio system.
As this whole field of products is still pretty new, I also didn't want to spend more money on one of the more advanced systems -- it seems that the customer feedback on all of these media players remains pretty mixed. So I stuck with something relatively simple, and this little box does what I want for a reasonable price. (Previously I was using my iPod on a docking station, connected to my stereo...for the modest price of this Netgear player I've now liberated the iPod that previously was wired up to my stereo.)
A couple of cautions:
1. A lot of the customer problems cited here at Amazon seem to relate to problems with wireless transmission. I did not even try to set this up in a wireless network; I just hard-wired it into the network port I had installed in my living room. I have had a lot of frustration in my home w/wireless devices so finally just gave up and dropped in wiring for a home network while I was having other electrical work done in my house. I am glad I bit the bullet -- the wired network is saving me a lot of time and trouble. This Netgear product is just one example of the kinds of things that are very happy tethered to a wire that seem to be much more problematic when they are wireless.
2. Throw away the software disk that comes with the hardware -- don't install it!. Instead, download the new software and firmware that is on Netgear's site. I couldn't get this to work at all at first -- tech support advised me to uninstall the provided software, download the software update on their site, and start over. This got more complicated than it sounds because I'd already built a database of songs for the Netgear and I had to hunt down this database file and kill it, too...it got a little bit tricky...so it took me a couple of hours in all to get this fixed. Had I started with the new software posted on Netgear's site, I would have had the whole thing done in 20 minutes. In any case, just go right to netgear's site and download their new software, and don't use the junk they ship with the product.
I also found netgear's tech support to be very, very good -- they answered the phone quickly (on Christmas Eve!) and were extremely helpful and patient.

Click Here to see more reviews about: NETGEAR Wireless Digital Music Player

NETGEAR's Wireless Digital Music Player lets you enjoy your digital music files stored on your computers and unlimited, worldwide Internet radio with your friends and family throughout your home. It connects your existing home stereo to your home computer network so you can listen to the digital music collection from any PC on your home stereo system. You can also listen to music directly from a 30,000 track digital jukebox using the RHPSODY¿ service (only available in U.S.) or hear thousands of Internet radio stations even when your PCs are turned off. Easy-to-install software on one PC automatically finds all your music files on any networked PC and collects them into one complete database. The remote control and stylish user interface let you sit on the couch and wirelessly stream MP3s or Windows Media format files from any PC on your home network straight to your stereo! The MP101 supports many PC operating systems, not just Windows XP, and the LCD display means you don't need to turn on your TV when you want to listen to music.

Click here for more information about NETGEAR Wireless Digital Music Player

Read More...

AmbiCom WL300N-AR Wireless 802.11b/g/n 300 Mbps Cable/DSL Router Review

Average Reviews:

(More customer reviews)First problem was my mistake. I was looking for a DSL modem/router combo and did not read the description well enough. However, I was able to easilly set it up as an access point and connect it to my current DSL Modem/Router combo. I turned off the wireless features from the old router and everything works fine for me in that regard.
300 Mbps? Not so sure about that. All of my current 802.11n wireless cards have the most recent firmware and drivers and the best I can get is 150 Mbps about a foot away from the router. Ten feet away, it drops off to about 135 Mbps and in the worst case scenario, its still better than my wireless G that I used to use. However, I bought this for the ability to stream multimedia throughout my house and my 802.11n equipped media extender is still connecting at less than desireable speeds.
Another issue that I had (and it was not mentioned in the documentation for the router OR the documentation for two of my HP laptops) is that YOU NEED to change your wireless security settings to WPA2. I was using WPA and could only connect at a max 54 Mbps. Apparently it is a problem with some routers and wireless cards that use the Ateros chipset. Neither HP, nor ambicom were able to resolve the issue and HP even sent a new WiFi card for my laptop thinking that would fix the problem. A bit of googling informed me about the slower speed issues and changing to WPA2 fixed the problem. HP support is now aware of the issue and has even thanked me for informing them of how I resolved the issue.
Is it better than what I had before? Yes. Is it as good as I expected? No, not yet. Hopefully a firmware update will resolve some of the speed issues and I'll be able to get the full 300Mbps (Yes, I have it set up to run "n" only and have no g devices on my network.)

Click Here to see more reviews about: AmbiCom WL300N-AR Wireless 802.11b/g/n 300 Mbps Cable/DSL Router

The product complies with DRAFT N 2.0 next generation wireless standard. Utilizing multiple antennas, it can support the data transmission rate up to 12x faster and 4x the coverage distance than the standard 802.11g products. Faster data speed and wider coverage enable you to enjoy the network applications without any interruption. WL300N-AR also supports Wi-Fi Protected Setup (WPS). Simply press the WPS button on the WL300N-AR router and a compatible WPS wireless device to configure the wireless security automatically. Setting up a secure wireless network has never been so easy.

Get 19% OFF

Click here for more information about AmbiCom WL300N-AR Wireless 802.11b/g/n 300 Mbps Cable/DSL Router

Read More...

NETGEAR 3DHD Wireless Home Theater Networking Kit WNHDB3004 Review

Average Reviews:

(More customer reviews)Of all the gadgets purchased in 2010, and I bought a bunch, the Netgear 3DHD WNHDB3004 is the biggest disappointment of the year. Netgear says loud and clear, our product will stream Blu-Rays. Well, I suppose it does but not more than a few minutes without getting dropouts.
I ran tests using a Netgear NeoTV 550. The NeoTV has a network test mode that shows streaming performance. To stream Blu-Ray, you need a constant 56Mbps or faster speed. The NeoTV would report that the 3DHD streams 62Mbps most of the time but occasionally showed dips below 56Mbps, sometimes as low as 38Mbps. That's literally a showstopper when streaming Blu-Ray. It turns a movie into a slideshow. The failed NeoTV network test results are completely consistent with the failed playing of Blu-Rays. The product is a big fail for its principle claim of streaming Blu-Rays.
I ran many other tests. Wired performance from my server worked fine. I flipped back and forth between wired and wireless. Clearly only wireless had an issue. I also tried moving the two devices around. I changed the orientation and distance between them. At no time did network speeds consistently stay at or above 56Mbps. I even fiddled with router settings hoping that disabling encryption or other changes would help. Nothing did. In the process of testing, I did discover a curious issue. If the two units are within inches of each other, communications fails. They have to be not-too-close and not-too-far.
Hard to believe that in 2010 there still are no devices that can wirelessly stream Blu-Rays without issue.
Update 11-Feb-2011: Retested with same result. Unable to sustain Blu-Ray bitrates in every configuration.

Click Here to see more reviews about: NETGEAR 3DHD Wireless Home Theater Networking Kit WNHDB3004

3DHD WIRELESS HOME THEATER NETWORKING Kit

Get 18% OFF

Click here for more information about NETGEAR 3DHD Wireless Home Theater Networking Kit WNHDB3004

Read More...

Linksys Wireless-G Access Point WAP54G - Wireless access point - Ethernet, Fast Ethernet - 802.11b/g Review

Average Reviews:

(More customer reviews)Bottom Line: The "Linksys Wireless-G WAP54G" represents the best of both worlds; it can meet your need for current 802.11b standards, but still has the flexibility to expand beyond to 54Mbps.
Wireless-G is the next wave in wireless networking technology. Wireless-G WAP's, and Network Interface Cards (NIC's) are capable of transmitting and receiving data at speeds of up to 54Mbps, almost five times faster than the widely deployed Wireless-B (802.11b) products found in homes, businesses, and public wireless hotspots around the country, and indeed around the world. Wireless-G devices can utilize either the 2.4 GHz or 5.0 GHz band, and some can utilize both bands. Those Wireless-G devices that share the 2.4GHz radio band, can also work with existing 11Mbps Wireless-B equipment, while those which utilize the 5.0Ghz band will interoperate only with Wireless-A (802.11a, 54Mbps) equipment. Dual-band Wireless-G equipment are capable of interoperating with all three protocols; i.e. 802.11a (54Mbps), 802.11b (11 Mbps), and 802.11g (54Mbps).
Enter the "Linksys Wireless-G WAP54G Wireless Access Point." The "Linksys Wireless-G WAP54G" operates at a frequency of 2.4 GHz, and supports the following wireless protocols: 802.11b and 802.11g (draft). The "Wireless-G WAP54G" can transmit and receive networking traffic in a range of 1 - 54Mbps. I choose the "Linksys Wireless-G WAP54G" for three reasons; 1. Because the card operates at a frequency of 2.4 GHz the same frequency band I currently use for my wireless communications; 2. The card is compatible with the 802.11b 11Mps standard, and; 3. Wireless equipment that operates at 2.4 GHz vs. 5.0 GHz have better range; i.e. 100-150 ft. (2.4Ghz) v. 50 - 75 ft. (5.0Ghz)
Installation
Like all of my previous WAP installations, I placed the "Linksys Wireless-G WAP54G" high on a shelf in the upstairs spare bedroom closet where it would cover the most area. Upon unpacking the box, the first thing you'll notice about the "Linksys Wireless-G WAP54G" is the handsome distinctive rich blue with black accents, color of the WAP inherent to all Linksys products. Another distinguishing feature is dual antennae and a plethora of LED (Light Emitting Diode) readouts on the front panel, which relay vital information to the user, such as connection speed with the wired hub and wireless clients.
Linksys' installation scheme requires that you first install the configuration software onto a computer tied to the wired portion of your network, and then plug the "Linksys Wireless-G WAP54G" into the same hub. Once this was accomplished and the unit was powered on, I ran the installation program and configured the WAP. The whole procedure took me less then five minutes to complete. The default IP address is in the 192. range, but it can be changed to conform to the particular IP Addressing scheme utilized for your network. As for me, I use the 10. range of addresses with a 255.0.0.0 subnet. Once the IP address and Subnet Mask are plugged into the "Linksys Wireless-G WAP54G", configuration is complete, unless you want to change the name of the SSID (Service Set Identifier); default is "Linksys" or turn on encryption; default is "off."
After the configuration of the "Linksys Wireless-G WAP54G" was accomplished I queried it via the ping utility for the next hour just to ensure its continued operation. I then removed it from the hub, and using my spouses workstation (already equipped with a Linksys Wireless-G WMP54G PCI Card, see below for a link to my review of this product), I was able to connect at a full 54Mbps.

First Impressions:
I am impressed! I had read on Amazon.com & Buy.com via user reviews that some had problems communicating with the WAP after the installation process, and quite frankly this gave me pause, but not enough to forgo purchase of the unit. My reservations were unfounded; the "Linksys Wireless-G WAP54G" has thus far worked flawlessly.
Under real-world conditions, the "Linksys Wireless-G WAP54G" performance exceeds my expectations. So far I have been able to connect to the WAP from anywhere in the house; upstairs or down, at either a full 54Mbps or 36Mbps, and rarely 18Mbps. My laptop has consistently connected at a rate 54Mbps, and it is in the downstairs master bedroom! This comes in handy when I am perched in front of the television in the downstairs living room, but I am still able to surf the web and download files to and from my server and workstation on the second floor! And the signal strength drops off only marginally on the backyard patio; 36Mbps is the best I've been able to do, that is still markedly better then the 5.5Mbps I used the get with my other two WAP's. The Bard is a happy man!
The spouses Windows XP workstation, which is also downstairs just off the living room, connects to the "Linksys Wireless-G WAP54G" with a signal strength that fluctuates between ? and full, and a connection rate that floats between 54 - 48Mbps. As for my primary workstation in the upstairs loft; the signal strength is full at all times, and the connection rate is 54Mbps.
The "Linksys Wireless-G WAP54G" is capable of automatically downgrading its data transfer rate as the signal from the connected wireless clients becomes weaker, thus maintaining connection. When at the extreme range of the clients the "Linksys Wireless-G WAP54G" can downgrade as far as 1Mbps, which is still within acceptable limits for surfing the web and working with documents, but little else, but isn't nice that I do not have to worry about that.
Conclusion:
The "Linksys Wireless-G WAP54G" is a phenomenal product. Since installation I have yet to touch it; it just works and works well, but of course time will tell. The "Linksys Wireless-G WAP54G" represents the best of both worlds; it can meet your need for current 802.11b standards, but still has the flexibility to expand beyond to 54Mbps. Can you say no-brainer? I knew you could.


Click Here to see more reviews about: Linksys Wireless-G Access Point WAP54G - Wireless access point - Ethernet, Fast Ethernet - 802.11b/g

Wireless-G is the upcoming 54Mbps wireless networking standard that's almost five times faster than the widely deployed Wireless-B (802.11b) products found in homes, businesses, and public wireless hotspots around the country - but since they share the same 2.4GHz radio band, Wireless-G devices can also work with existing 11Mbps Wireless-B equipment.The Linksys Wireless-G Access Point lets you connect Wireless-G or Wireless-B devices to the network. Since both standards are built in, you can protect your investment in existing 802.11b infrastructure, and migrate your network clients to the screaming fast Wireless-G standard as your needs grow.To protect your data and privacy, the Wireless-G Access Point can encrypt all wireless transmissions. The MAC Address filter lets you decide exactly who has access to your wireless network. Configuration is a snap with the web browser-based configuration utility.Future-proof your wireless network with the Linksys Wireless-G Access Point. You'll enjoy Wireless-B connectivity today, and be prepared for a high-speed Wireless-G tomorrow.

Click here for more information about Linksys Wireless-G Access Point WAP54G - Wireless access point - Ethernet, Fast Ethernet - 802.11b/g

Read More...

NETGEAR WG102 ProSafe 802.11g Wireless Access Point Review

Average Reviews:

(More customer reviews)The NG102 works like it should--with one exception that I've found. If you set it up in Bridge Mode, it will NOT work with WPA security--you can only use the inferior WEP security.
WEP can be cracked in under 24 hours (the netgear helpfiles built into the WG102 setup pages even say this), but they still force you to use WEP security when bridging.
Additionally, Netgear's tech support is ABYSMAL. I have submitted several trouble tickets with questions, and it sometimes takes them TWO WEEKS to reply--and even then they did not give a reasonable answer to my question, they gave a stock answer to something I didn't ask. The user suport forum is much better, but you're not guaranteed to get any help there, either.
*** UPDATE: 12/27 - I'd like to downgrade this product to ONE STAR! ***
This access point would lock up at least once a day. The only solution was to unplug the power and plug it back in.
I found it had particular difficulty when trying to transfer files over the local network and when running internet speed tests (such as www.speakeasy.net/speetest). Somehow they seemed to confuse or overwhelm the access point, and it had to be hard-reset. Neither of those activities should have caused it any trouble at all--especially not this (much more expensive) "business-class" access point.
After spending way too much time troubleshooting the problem, I have finally given up and will return it.

Click Here to see more reviews about: NETGEAR WG102 ProSafe 802.11g Wireless Access Point

The NETGEAR WG102 ProSafe 802.11g Wireless Access Point provides a secure and reliable wireless network with enterprise-level functionality at a mid-market price.
Fast and Secure Fully compatible with the 802.11g wireless standard at 54 Mbps, with an optional turbo mode for a speedy 108 Mbps when used with supported NETGEAR adapters, the WG102 offers a network connection that is fast and widely compatible. As 802.11g is backwards compatible with 802.11b, you needn't worry about your computers with older network cards not working.
Your data is secure, as the WG102 complies with industry security standards for user authorization and wireless data encryption; 802.11i, WPA2-Enterprise technology will keep your wireless network secure and interoperable. Also supported is MAC address authentication with a 256-user Access Control List and VPN pass-through.
Bridge and Repeater Mode In addition to functioning as an access point, the access point can also be used as a bridge and as a repeater. Used as a bridge, the device allows you to connect two LANs wirelessly; as a repeater, your wireless signal's range is extended so even the remote corners of your home or office can be covered.
Smart Design and Easy Setup Thanks to support for the IEEE 802.3af-based Power over Ethernet (PoE) standard, the need for extra cables are eliminated and the access point doesn't have to be put near a power outlet. The Simple Network Management Protocol is supported, allowing you to use any SNMP-based network management software. NETGEAR's Smart Wizard browser-based interface makes setup a snap.
The access point comes with one detachable antenna. The NETGEAR WG102 ProSafe 802.11g Wireless Access Point is backed by a lifetime warranty (power supply is backed by a 3-year warranty).
What's in the Box WG102 Wireless Access Point, one 5 dBi detachable antenna, resource CD, power adapter, Ethernet cable, installation guide, and warranty/support information card.

Click here for more information about NETGEAR WG102 ProSafe 802.11g Wireless Access Point

Read More...

Sony VAIO Wireless LAN Access Point Pro, 2.4 GHz (PCWA-A200) Review

Average Reviews:

(More customer reviews)Would have given it 0 stars, but obviously it's not available. This product is absolutely terrible. It does not work with even the Sony Wireless LAN Card. Had to return it and purchase the Linksys.

Click Here to see more reviews about: Sony VAIO Wireless LAN Access Point Pro, 2.4 GHz (PCWA-A200)

Access e-mail, the Internet, or your network wirelessly! The new Sony VAIO Wireless LAN Access Point lets you share files, drives, printers with one or more computers on your wireless network. Using any IEEE 802.11b industry-standard wireless LAN PC Card, you are assured of secure communication, high-speed data transfer rates and a range of up to 46 m (line-of-sight).

Click here for more information about Sony VAIO Wireless LAN Access Point Pro, 2.4 GHz (PCWA-A200)

Read More...

Buffalo Technology AirStation Turbo G High Power Wireless Ethernet Converter ( WLI-TX4-G54HP ) Review

Average Reviews:

(More customer reviews)The WLI-TX4-G54HP is not perfect, but it is one of the best bridges out there. Unlike most bridges from Netgear, Linksys, and D-Link, the Buffalo Technology WLI-TX4-G54HP has 4 Ethernet ports built in, eliminating the need for a separate switch. This is key, since the advantage of a bridge versus wireless adapters is that one bridge can be used for multiple devices (e.g. in an entertainment center to support a TiVo, Wii, Xbox, Xbox 360, PS3, Slingbox, etc). The costly and time consuming alternative is to buy and configure a separate wireless adapter per device, one of which costs as much as the WLI-TX4-G54HP, and many of which don't even support the latest network security encryption.
Compared to other network equipment, setup was relatively straightforward. If you have a Buffalo router or access point, you can use one touch AOSS setup, which worked seamlessly, defaulting to the highest level of encryption supported by all devices (e.g. WPA-AES/CCMP). However, your AOSS settings on your Buffalo router default to supporting 125 High Speed if supported by all devices on your network which can cause issues on the WLI-TX4-G54HP (see below). Also, using AOSS to configure the converter disables any custom settings on your router such as disabling SSID broadcast (a highly recommended security practice), so you'll probably opt to configure your converter manually.
With Manual configuration you have the option of using the PC configuration software or the built-in web-based configuration tool. The only hitch with using the web-based configuration tool is that you have set your computer's wired Ethernet adapter IP address manually to 1.1.1.2 since the converter's IP address defaults to 1.1.1.1 and you have to be on the same subnet to connect to it since there is no built-in DHCP server (to do this, Right-click Network Places, click Properties, right-click your Local Area Connection, click Properties, click TCP/IP, click Properties, select Use the following IP address, and enter IP address 1.1.1.2 and subnet mask 255.255.255.0). Once you change your computer's IP, you can log into the tool, change the network and security settings and change the static IP address of the configuration tool to an IP on your subnet (e.g. 192.168.x.2) so you can manage it from any computer on your network. Don't forget to change your IP And DNS back on your computer back to automatic detection after you are done configuring your device.
On the downside, if you are using the WLI-TX4-G54HP in 125 High Speed Mode mode (aka g+ SuperSpeed, Gplus, HSM, SpeedBooster, Turbo G, Xpress, WME), which is only possible when used on a network with all 125 High Speed compatible devices, it freezes up and requires a power cycle when used under intensive bandwidth conditions, which I discovered when trying to transfer video between two TiVos connected to two WLI-TX4-G54HP converters and a Buffalo WHR-HP-G54 router (all of which support 125 High Speed Mode). This can be avoided by disabling the 125 High Speed frame bursting mode on your router. You will not experience this problem on a non 125 High Speed network (or even if you have a 125 High Speed Network with any non-125 High Speed devices on it since every device must support it to enable it).
Finally, if you have WDS-compatible router, such as any Buffalo router, you are better off using another WHR-HP-G54 router as a bridge since it provides the same functionality as the WLI-TX4-G54HP but also acts as a repeater to extend your network signal, and costs about the same price online. In fact, the WHR-HP-G54 looks identical to the WLI-TX4-G54HP, except that the latter lacks a WAN port and a switch to change from router to bridge mode. The only downside to using the WHR-HP-G54 as a bridge, is that doing so requires disabling 125 High Speed Mode on your router, but since this doesn't work well anyways, it isn't really a disadvantage.

Click Here to see more reviews about: Buffalo Technology AirStation Turbo G High Power Wireless Ethernet Converter ( WLI-TX4-G54HP )

Buffalo Technology AirStation Turbo G High Power Wireless Ethernet Converter ( WLI-TX4-G54HP )

Click here for more information about Buffalo Technology AirStation Turbo G High Power Wireless Ethernet Converter ( WLI-TX4-G54HP )

Read More...

ASUS RT-N10 Wireless-N Router Review

Average Reviews:

(More customer reviews)Pros:
-Cheap B/G router
-runs in AP mode
-Power brick was small and light weight compared to an older Linksys 54G.
Cons:
-No software wireless support in DD-WRT. Some soldering required for a quick fix which isn't the most optimal solution.
-Web interface was a bit confusing.
-Band width management is really really bad. Avoid this!
-802.11N is run in 2.4GHz range which will interfere with 802.11B/G
FYI:
Port forwarding is called Virtual Server.
SETUP:
Router mode
No Bandwidth management
Virtual Server
Wireless B/G
REVIEW:
Do NOT use the bandwidth management! This management slowed down the connection to the internet. I had to reset the router. Once it was back to the original configurations, the router has not given me any problems. So far the router has been running for two weeks without any problems.
The wireless B/G connection works well. I don't usually play my Xbox 360 over wireless, but I did test the wireless N function. I was able to play a couple of matches of Modern Warfare 2 on Xbox live without much repercussion.
Also the AP mode worked well. I was able to easily configure the wireless SSID and key.
For an Asus product, I believe this is mediocre. I expect a lot from Asus, but this is just okay. For my budget this router was a great choice, but I would only buy this again once DD-WRT becomes available for the router. (Looks like a few may be here soon.)

Click Here to see more reviews about: ASUS RT-N10 Wireless-N Router

ASUS RT-N10 - EZ N Wireless Router 150Mbps High Speed CD-Free Installation and Manual-Free Management 2-Network-in-1

Click here for more information about ASUS RT-N10 Wireless-N Router

Read More...

Cisco-Linksys Wireless-G Bridge for phone adapters WBP54G Review

Average Reviews:

(More customer reviews)I was extremely hesitant in getting this because I worried that voice lag would be created by the semi-complicated setup we have.
To give some background:
We have 3 cordless phones around our house that talk to a central base station that is plugged into a wall jack. Elsewhere in the house, we have Linksys PAP2 device (Vonage Service) that one end plugs into the wall (backfeeding to the phone base station), and the other half was plugged into our home router.
For those Visual People:
Cordless Phone > Phone Base Station > House Wiring > PAP2 > Router > Cable Modem > Vonage
My concern was that by inserting a Wireless Bridge between the PAP2 and the Router (which is now on the other side of the house), that a delay would be created, or the signal would occasionally just drop.
I am happy to say that I completely over thought the complications of it.
When the device came, I followed the setup wizard on the CD (didn't bother with the picture book type printed instructions) and had the bridge configured in about 15 minutes. I then moved the PAP2 and Bridge to where I needed them, and plugged it in...and like magic, everything worked great. We've had no lag, no problems, and most importantly, no signal drops.
While wired is still the most reliable method to make sure your VoiP phone device talks to your network consistently, I would definitely recommend this device to anyone who has to take the wireless route.


Click Here to see more reviews about: Cisco-Linksys Wireless-G Bridge for phone adapters WBP54G

Now you can put your IP Phone almost anywhere in the building, without the cost and hassle of running network cables. The Wireless-G Bridge for Phone Adapters was specially designed to convert your IP Phone into a wireless device, so it can connect to your network without an Ethernet cable. This lets you put your IP Phone where it s most convenient and frees you from the constraints of plugging into the nearest network port.

Get 32% OFF

Click here for more information about Cisco-Linksys Wireless-G Bridge for phone adapters WBP54G

Read More...

NETGEAR WGPS606 54 Mbps Wireless Print Server with 4-port Switch Review

Average Reviews:

(More customer reviews)I have a wirelss network w/3 pc's, one Mac Powerbook, w/netgear router, and now the WGPS606 netgear printserver (my motorola WPS870G was half the $$$ and easier to set up on my Powerbook, but got killed by lightning storm yesterday); I have an old laserjet & HP officejet d145. Contrary to rumors, you can get the WPS870G to printserve wirelessly from Mac/OSX through the network (i.e., powerbook is wireless, printserver is also wireless)
1-I set a dedicated IP address in my router to associate w/my printserver...To do this: in 192.168.0.1 (which is the router) I renewed IP addresses, looked into the router's assignment table, and figured out that the printserver was at 192.168.0.4, so I just assigned it to 192.168.0.4; to do the assignment, you also need the device (i.e., the printserver's) MAC address; that's the trick...the MAC address on the netgear printserver is called the "device" or "hardware" MAC address, and it's the number printed on the box itself; if you go to the printserver ip address (in my case, 192.168.0.4), you find netgear's set up pages for the printserver; the printserver has two mac addresses, the 2nd is called something like the `wireless' MACaddress; that wireless MAC address (which is only different by one digit at the end) is what you use when you set up a dedicated IP address for the print server; when you've done all this, you should probably go back into 192.168.0.1 (your router set up pages) try to renew ip addresses to see if the assigned printserver address (in my case, 192.168.0.4) shows up and shows up with the right MAC address
3- when setting up a new printer in printer set up utility, you select IP Printing + LPD/LPR, printer address is your new ip address that you assigned (192.168.0.4 in my case) and queue name is L1 (presumably L2 if you have a second printer)
btw, you may need to upgrade the driver (I needed an HPIJS driver for my multi-function HP d145); the original driver didn't even install from the cd


Click Here to see more reviews about: NETGEAR WGPS606 54 Mbps Wireless Print Server with 4-port Switch

With the NETGEAR WGPS606 54 Mbps Wireless Print Server with 4-port Switch, users on your network have the freedom to print wirelessly to up to two printers. It also functions as a wireless Ethernet bridge, allowing you to extend your wireless connection and connect up to four users to your wireless network.
Wireless Printing and Bridge The WGPS606 has two USB ports to connect two printers. Simply put your printers wherever works best and plug them into the wireless print server; a Smart Wizard will guide you through configuration in just seconds. Once configured, anyone on the network can print to either printer; business documents can be sent to the high-end laser and photos can be printed on the photo printer. No separate adapters are needed. The print server can print via Peer-to-Peer (PTP) and Windows LPD printing methods.
The print server also functions as a wireless Ethernet bridge, allowing you to connect a cluster of up to four PCs and laptops without dedicated wireless adapters.
Secure and Compatible Powerful 40/64-bit and 128-bit WEP encryption and WPA-PSK keep your wireless network secure. The device is interoperable with 802.11b, 802.11g, and RangeMax (MIMO-G) networks, so you can be sure it will work with your existing wireless network.
The NETGEAR WGPS606 54 Mbps Wireless Print Server with 4-port Switch is backed by a 1-year warranty.
What's in the Box WGPS606 54 Mbps Wireless Print Server w/4-port Switch, power adapter, 2 USB cables, resource CD, installation guide, warranty/support information card.

Click here for more information about NETGEAR WGPS606 54 Mbps Wireless Print Server with 4-port Switch

Read More...

NETGEAR Wireless-N Access Point Review

Average Reviews:

(More customer reviews)HI All,
The Netgear WN802Tv2 is an Access Point that is meant for an existing network that already has a router setup. In other words, you will need to have a wired or older wireless-g router in place before you can use this device for Wireless-N Connectivity.
Basics first:
Whats in the Box? Access Point, Ac Adapter, Ethernet Cable, Netgear CD, Quick Start guide, Warranty Card, and Stand.
Setup:
So begins the install and testing. I was mildly irritated when I read the quick start guide. Most of you that have routers with a 192.168.0.x address will be ok and can install this thing in a jiffy where as others that use different ip addresses like 192.168.1.x will have to go through a few extra steps as I did. Basically this access point comes configured with a 192.168.0.x address out of the box...therefore you must follow the quick start guide and first connect it to your computer with an ethernet cable to configure it. That being said, if your network provides 192.168.0.x addresses and you are not using 192.168.0.233 you should be ok to plug this in and set it up via your browser.
Once the IP situation is ready to go you simply open your web browser and go to the 192.168.0.233 ip address. Log in with the username and password on the quick start card and you are given access to setup the access point with your preferences. Here are some of the basics:
1. Upon Entry - Name of Access point and Country it is used in.
2. Time Zone and If you would like to use a internet time server.
3. IP Settings - you can manually assign it an ip address or have it use dhcp to get one from your existing router.
4. Wireless Mode - 11b, 11BG, 11NG - all at 2.4ghz (another disappointment).
Once you get more deeper into the setup you are able to go through a multitude of wireless options which include things like the broadcasting of your wireless id, security, quality of service etc. This access point does include Quality of Service settings for Wi-FI Multimedia (WMM) which basically provides preference to multimedia based content over the wireless network.
This access point allows for a good array of security settings and supports Wep 128/152bit, WPA, etc....it also adds support for Radius Settings which can be found in an enterprise environment.
Wireless Performance:
This is probably one of the hardest tests to run but I was able to get some results. I used a commonly known speed test site to test my broadband connectivity whilst using the Netgear access point. As background, I have about 15-20mbps download and 2mbps upload via Comcast. The speed test on this router was similar to what I have achieved on my D-Link and Apple Airport Extremes. For that it gets a 5/5.
Speed testing was not enough and now it was time to stream a hd quality movie from this device onto my ps3 from a mac.....this is probably where this access point will shine. I usually stream movies and get a bit of stutter here and there...so I wanted to make sure I tested a movie that I have played before. I started the the movie and saw a stutter for about one second...but once it started streaming it played on and I did not notice any of the usual issues. The WMM QOS does work (wi-fi multimedia quality of service). More testing will continue and I will update my review to indicate the good or bad.Now for my thoughts and opinion on the product:
The size of the device is nice and the look is perfect. The picture on the product page does not do it any justice. The LED's are perfectly light and not too bright...they wont take your eye out.
I like the documentation, it will allow any user from novices to advanced users to be able to get up and running quickly with this device....More advanced documentation is on the resource CD. Note...you do not need the CD to install the device as the quickstart will guide you in the right direction at the get go.
The price is high - If you are going to spend over $100 to buy an access point you are better off spending the same amount to buy a new router which has built in Wireless N abilities. Even if you dont need another router, you can buy one and use it as an access point.
NO 5ghz - Another negative - most wireless-n routers are now able to broadcast in 5ghz mode. This router does not have that ability...and again for something with this price point it should. You can also spend $10-20 more and buy a dual band router which broadcasts in both 2.4ghz and 5ghz modes. With all of the wireless around our homes and offices, it is a must to have the 5ghz band so our computers can run un-affected by other wireless devices such as cordless phones etc....
Wireless performance is on par with other products and the WMM-QOS features make this access point shine.
Last but not least - and this may be just for me - but I think that Netgear can make this device ship so that it can pick up a DHCP address from our existing networks. This way everyone that buys one is able to plug it in and get to setting it up. I have seen this done on a multitude of products and Netgear can surely adopt those feature sets. I am a little knowledgeable in these things, but for a home user I would not want them changing ip addresses on their computers and plugging routers into them...its a bit on the complex side.
I think there are many improvements to be had on this item and price is definitely one of them. While I like the performance of the wireless, I do not like other things, as stated above, thus my rating is on the low side.
3/5 for me....sorry Netgear.
NOTE: Yes, I received this product for free from Amazon...for which I am grateful. My review on the other hand is as HONEST as can be after using/testing for 2 hours. I am fortunate to be a member of the Vine but I try my best to make sure that anyone buying a product I have been given gets a honest and un-biased review/opinion. Thanks!

Click Here to see more reviews about: NETGEAR Wireless-N Access Point

Netgear WN802T-200 Wireless-N Access Point is a powerful and multi-functioned 11n Access Point. Netgear WN802T-200 Wireless-N Access Point is a Wireless Network device that delivers up to 6x faster speeds and 7x extended coverage than 802.11g devices. Netgear WN802T-200 Wireless-N Access Point supports home network with superior throughput, performance and unparalleled wireless range. To protect data during wireless transmissions, Netgear WN802T-200 Wireless-N Access Point encrypts all wireless transmissions through WEP data encryption and supports WPA/WPA2. Its MAC address filter allows users to select stations with access to connect network. Netgear WN802T-200 Wireless-N Access Point thus is the best product to ensure network quality for hotspots.

Get 38% OFF

Click here for more information about NETGEAR Wireless-N Access Point

Read More...

ZyXEL PLA-450 200 Mbps Powerline HomePlug AV 802.11g Wireless Access Point Review

Average Reviews:

(More customer reviews)We recently built out our basement and before I spent the time and money to cat5 my whole house or possibly add a second cable modem, I decided to give the PLA-450 + 1 PLA-401 a try. To my amazement, I saw no degradation of speed when connected to the PLA-450 wirelessly at a reasonable range than I did when connected directly to my cable modem. This powerline duo smokes. My cable modem is on the second floor and my primary DLink wireless router is connected to it. Needless to say, getting great coverage from the second floor to my basement was not possible on the DLink. So the PLA-450 acts as my second wireless router (called an access point) allowing me to plug it into any wall outlet in the house. You do have to have at least 1 PLA-401 (connected to the primary router) and then your powerline link is complete. The PLA-450 is a good wireless device permeating interior walls with ease and maintaining reasonably strong reception with my laptop - even with a floor in between. Accessing the PLA-450 device via a browser is a little tricky the first time. You have to temporarily change you IP address on your network connection. I called support and they were easy to get ahold of and nice and friendly. The instructions do tell you what is needed so a call is probably not necessary for most users. I am thrilled that I can get near cat5 performance without having to hard-wire my house. A great product that suits my need perfectly.

Click Here to see more reviews about: ZyXEL PLA-450 200 Mbps Powerline HomePlug AV 802.11g Wireless Access Point

Get 15% OFF

Click here for more information about ZyXEL PLA-450 200 Mbps Powerline HomePlug AV 802.11g Wireless Access Point

Read More...

AirLink 101 AP671W 300Mbps 802.11n Wireless LAN Access Point and 5-Port Switch Review

Average Reviews:

(More customer reviews)I've been using this unit as an "AP Client" (wireless bridge to connect my ethernet (no-wifi) computers to my wireless LAN). I paid about $40 for this unit which is significantly less than competing products with similar capabilities. Setup with connection to my existing Wireless-N router using WPA security was very easy and the unit initially was reliable and performed very well. Like any other home network equipment it is left "on" 24/7 and it never gets hot etc. So far, so good.
After having the unit in service for several weeks without incident, my ISP had an outage with all internet connectivity failing. After my ISP restored service, I noticed that the AP671W was not providing connectivity to the rest of my now-functional wireless network. I was also unable to access the AP671W's built-in web interface to check things out. Re-powering the unit did not help and switching the radio off and on did not work either. Eventually, I had to resort to a factory reset and run the Airlink EZWizard.exe setup program to reconfigure the unit. Fortunately, that is actually a fairly simple process and does not take too long. Also fortunate that I did not have to physically connect the AP671W to my WiFi router as described in the instructions - the unit was able to find my WiFi router and re-establish a connection once I provided the correct network settings and WPA passphrase. This has now happened to me three times and is always triggered by my main WiFi losing WAN connectivity or getting reset. I now keep the AP671W EZWizard.exe program on my local hard disk so I don't have to dig out the CD next time I lose connectivity as it will inevitably be needed again.
I visited the AirLink web site looking for any available firmware updates.... there were none. This is my first Airlink product and so this did not leave me with a good impression. I suppose it's possible that I have a one-off defect in my particular unit but that seems unlikely and since it generally works and I can fix it when this issue occurs, trying to get a replacement is more trouble than it's worth (since I purchased over the internet). I'm using it primarily in my home office so fortunately I'm the only one impacted when problems arise (since I'm the only one in the house who can fix it).
So, the bottom line is that it's a pretty good unit, costing about half (or less) than products with similar capabilities. When it loses its connection the fix is pretty easy (for me at least) but could be a problem for those less technically inclined.
Finally, I should stress that I have only used this unit in "AP Client" mode (connect ethernet devices to wifi LAN). There are five other modes that the unit operates in (Access Point, Universal Repeater, Point-to-Point Bridge, Point-to-Multi-Point Bridge, and WDS Bridge) and these may or may not experience the same problem.


Click Here to see more reviews about: AirLink 101 AP671W 300Mbps 802.11n Wireless LAN Access Point and 5-Port Switch

The AP671W is an Access Point, Universal Repeater, AP Client (Wireless Bridge), Point to Point, Point to Multi-Point Bridge and WDS Bridge in one sleek device. It's designed for those who want to add wireless capability to a wired network or extend the range of wireless networks! This Wireless N 300 is equipped with a 5-port 10/100 Mbps switch and delivers fast data rate of up to 300 Mbps! Two 3 dBi antennas provide longer distance and wider coverage! Plus, you'll get superior security protection with WPA2, WPA and WEP encryption!

Get 10% OFF

Click here for more information about AirLink 101 AP671W 300Mbps 802.11n Wireless LAN Access Point and 5-Port Switch

Read More...

NETGEAR WN802T RangeMax Next Wireless-N Access Point Gigabit Edition Review

Average Reviews:

(More customer reviews)My husband has a computer business and has purchased 5 of these devices for various customers. Each and every one of them have failed. Three of them within the 3 months Netgear will provide free support for and two of them after 1 year.
When they work they don't work so well, a lot of disconnects, and network not found. Working with support stated that too many wireless networks in a congested area will cause this. Understandable, but hardware failures are not understandable.
Out of the five of them, Netgear has replaced the three that failed withing the 90 period and they have been taken out of service since then. There were too many network disconnects to be useful.
When they fail the power light comes on, but nothing else. No network light when the cat5 cable is plugged into it, nor does the wireless work on the device either.
My husband made the mistake of purchasing them when they were fairly new and paid over 170.00 per. What a mistake. DO NOT PURCHASE THIS AS IT IS JUNK.

Click Here to see more reviews about: NETGEAR WN802T RangeMax Next Wireless-N Access Point Gigabit Edition

The NETGEAR WN802T RangeMax Next Wireless-N Access Point Gigabit Edition lets you easily set up a wireless network in your home so you can share a single internet connection with everyone in your household at speeds up to 300 Mbps. You can stream music and video, make internet phone calls, videoconference, and surf the web, all at the same time.
Easy Setup The WN802T makes it easy for even a novice to set up a wireless network: just plug the included Ethernet cable from your LAN into the device and insert the included CD into any computer on the network, which will provide step-by-step instructions. The WN802T offers a myriad of placement options by including a stand for vertical placement and also a wall-mount kit.
The WN802T employs a web-based interface for configuration for compatibility with any computer with a web browser. The firmware is also upgradeable via the web interface so you can be sure your access point will always be up-to-date.
New Technology Means Blazing Speeds and Backwards Compatibility The WN802T complies with the latest 802.11n draft specification which allows for speeds up to 300 Mbps; this maximum speed can be achieved when used with other TopDog devices. By utilizing MIMO (multiple-input, multiple-output) technology, the WN802T has speed and range far surpassing the older 802.11g standard. The preset antennas in the access point ensure that the device is always tuned for optimal performance, and NETGEAR's Wi-Fi Multimedia technology optimizes audio, video, and voice applications.
By using Gigabit Ethernet for the backend, you'll be certain that the access point is receiving data at the highest possible speeds, ensuring the 300 Mbps wireless throughput is not going to waste.
If you still have computers that use 802.11g or 802.11b, don't fret as the access point is backwards compatible with the older wireless standards and can be set so all your computers can connect to the network. The access point will automatically figure out the connection type and work accordingly.
Security Made Easy NETGEAR's Touchless WiFi Security makes it quick and easy to set up network security on a WiFi network by asking for a passphrase from the user. The WN802T supports WiFi Protected Access (WPA2-PSK, WPA-PSK), and 64-bit and 128-bit WEP encryption for 802.11b/g networks. Additionally, you can set security through MAC address authentication, allowing only authorized users onto the network. There is also support for 802.1x RADIUS support with EAP TLS, TTLS, and PEAP.
The NETGEAR WN802T RangeMax Next Wireless-N Access Point Gigabit Edition is backed by a 1-year warranty.
What's in the Box WN802T RangeMax Next Wireless-N Access Point, power adapter, Ethernet cable, stand, wall-mount kit, resource CD, installation guide, warranty/support information card.

Get 17% OFF

Click here for more information about NETGEAR WN802T RangeMax Next Wireless-N Access Point Gigabit Edition

Read More...

NETGEAR 5 GHz Wireless-N HD Access Point/Bridge (WNHDE111) Review

Average Reviews:

(More customer reviews)Old Setup
Netgear WGT624NAv3 (G - 108Mbs)
Netgear WGPS606 (Print Server/Bridge 54 Mbs)
New Setup
Netgear Rangemax WNDR3700
Netgear WNHDEB111
Background:
I honestly hated Netgear. The nightmares I had with my old setup were terrible. I constantly had to reboot the router; the bridge required me to reconnect wireless devices in a certain order every time; my fiance's Apple never stayed connected long; bittorrent, VPN and video streaming knocked the router out the few times it was working; and the customer service is just horrible. I swore I'd never buy another Netgear product, but I finally had to buy something that would at least work for my fiance. I waited a few months for 802.11n to mature a bit, and was going to get the DLINK DIR-655. Recently it's had horrible firmware issues though and the other brands had low reviews. Then along came the WNDR3700.
The reviews were great so I picked it up and this bridge. I fully expected it to work as badly as my previous Netgear products, but I felt I had to give it a shot.
Conclusion:
I've had this product connected to my WNDR3700 for two days now and it works flawlessly. I have had many wireless setups and this is the best I've ever seen. I've seen people complain that it's on the 5Ghz frequency only, but it works great. All of my other systems are wired or on the 2.4Ghz frequency so I have very little overlap. Of course the WNDR3700 is dual-band so that may not be the same for everyone. I will update this if anything changes but for now I'm extremely happy. It could work at half the speed it does and I would still be happy to have something that just works for once.
Update:
Everyone in my home has problems with the iphone and this router. We constantly get disconnected. It's a known issue on their forums. There is a recent update that helps a lot but almost everyday I still lose my connection and have to re-enter my password. Otherwise this router is still working amazingly. I've only had to reset it one time.
Update:
The last update pretty much fixed the iphone issues. I rarely have to reconnect my phone anymore. If you plan on using the USB storage part of the device though I'd recommend reading the Netgear forums. Some people have had some issues with this.

Click Here to see more reviews about: NETGEAR 5 GHz Wireless-N HD Access Point/Bridge (WNHDE111)

The NETGEAR WNHDE111 5 GHz Wireless-N HD Access Point/Bridge lets you create a 5 GHz Wireless-N access point by simply connecting it to an existing router/gateway. The resulting wireless network lets you transfer data at the highest possible Wireless-N speeds, making it an ideal solution for network gaming and streaming HD videos. By utilizing patented metamaterial antenna technology, the WNHDE111 offers a speed and range far surpassing the older Wireless-G standard.
Easy Setup Simply connect the WNHDE111 to your router/gateway. Setup is easily and securely done with a simple "Push 'N Connect" feature using Wi-Fi Protected Setup (WPS), which eliminates the need to remember or input security password keys. The device automatically configures itself to access point or bridge mode depending on the type of Ethernet enabled device it connects to.
You can easily extend your wireless network by purchasing more WNHDE111 units, or start with the NETGEAR HD/Gaming 5 GHz Wireless-N Networking Kit.
Minimal Interference = Outstanding Performance Most wireless devices today, such as Wi-Fi devices, cordless phones, Bluetooth devices, microwaves, and baby monitors, operate on the 2.4 GHz frequency, creating a lot of traffic and interference. The WNHDE111, however, operates on the 5 GHz band, which has up to 23 free channels and avoids the interference from most other devices.
The WNHDE111 complies with the latest Wireless-N draft specification for the fastest possible Wireless-N speeds. Automatic Quality of Service (QoS) ensures prioritization of voice, video and gaming traffic. It also supports wireless "ad-hoc" mode for wireless LAN peer-to-peer gaming and supports multicast point-to-multi-point HD video streaming.
The WNHDE111 supports WiFi Protected Access (WPA2-PSK, WPA-PSK), and 64-bit and 128-bit WEP encryption and is backed by a 1-year warranty.
What's in the Box WNHDE111 5 GHz Wireless-N HD Access Point/Bridge, stand, Ethernet cable, setup CD, power adapter, and warranty/support information card.

Click here for more information about NETGEAR 5 GHz Wireless-N HD Access Point/Bridge (WNHDE111)

Read More...

D-Link DAP-1522 Xtreme 4-Port GigaBit Selectable Dual Band Draft 802.11n N Duo Wireless Bridge/Access Point Review

Average Reviews:

(More customer reviews)I've configured the DAP-1522 as a wireless bridge to a DIR-655 (2.5Ghz). I've got a PS3 and a Satellite DVR connected to two of the four ethernet ports on the DAP-1522. I have configured the 1522 to use WPA2 security as well.
Setup was a little tricky, but it was my fault not the fault of the 1522. If you choose to manually configure the 1522 be sure you follow the directions and connect the 1522 to your computer and with your computer configured to use a static IP address in the 192.168.0/24 subnet. I mistakenly had my computer still trying to use DHCP when connecting to the bridge and it took me a little while to figure out what was wrong. My computer couldn't get an IP address and so Windows kept assigning an address from a different subnet, so I was not able to establish a connection to the DAP-1522's default 192.168.0.50 IP address.
The 1522 works as expected. Performance is very good with a max of 162Mbps through 3 drywall walls (approx 40 ft) to my entertainment center as displayed on the DIR-655 console. I haven't run any local network bandwidth tests to verify the throughput yet, but I can easily stream HD content without blocking between a PS3 and a wired media server. Previously I was using the PS3's internal 802.11g network interface, and HD media was not viewable as it overwhelmed the 11g link.
I did notice that the orientation of the DIR-655 and the DAP-1522 did make a difference in the reported signal strength and data rate as seen from the DIR-655 console. So after you've gotten things to work, don't forget to run some experiments to determine the best position for the devices to get the best performance possible.


Click Here to see more reviews about: D-Link DAP-1522 Xtreme 4-Port GigaBit Selectable Dual Band Draft 802.11n N Duo Wireless Bridge/Access Point


The D-Link DAP-1522 Xtreme N Duo Wireless Bridge/Access Point is designed for users looking to create a wireless network or to connect multiple wired devices to an existing wireless network. Xtreme N Duo is the latest addition to the award-winning Xtreme N product family. Duo means the DAP-1522 works with next generation dual band (2.4 GHz or 5 GHz)* 802.11n wireless devices as well as legacy 802.11g products.
The D-Link DAP-1522 offers dual-band Wireless N connectivity--perfect for HD video streaming (see larger image).

Get 39% OFF

Click here for more information about D-Link DAP-1522 Xtreme 4-Port GigaBit Selectable Dual Band Draft 802.11n N Duo Wireless Bridge/Access Point

Read More...

TRENDnet 300Mbps Wireless N Access Point TEW-638APB (Black) Review

Average Reviews:

(More customer reviews)Home networking can be a real pain especially for someone like me who knows enough to be dangerous but not enough to be a network installer. I have a wireless router burried in my basement that wasn't getting signal to my upstairs part of the house. I tried two other different products 1) two routers connected to each other and 2) a Hawking repeater. I ended up wasting a lot of time with them and they just didnt work or had compatibility issues. I took a plunge on the no brand trendnet based on this other positive review and he was 100% right. The price is 50% cheaper than the comparable Linksys N switch and does exactly as advertised. Setup took 5 minutes and I now have coverage all over my house. No issues so far.

Click Here to see more reviews about: TRENDnet 300Mbps Wireless N Access Point TEW-638APB (Black)

TRENDnet 300Mbps Wireless N Access Point TEW-638APB Wireless Access Points

Get 31% OFF

Click here for more information about TRENDnet 300Mbps Wireless N Access Point TEW-638APB (Black)

Read More...