Cisco-Linksys BEFCMU10 Ethernet Cable Modem Review

Average Reviews:

(More customer reviews)First I need to thank all of you guys who gave the Linksys cable modem 4 and 5 stars. If it had not been for your reviews I would have sent this great modem back to Amazon.
I spent 6 hours trying to get this modem working, getting help from 4 different techs at AT&T. They told me that this modem was bad and that the cable light needed to stay on and that the Linksys modem would not register with their system. They told me I needed to send it back and get another one. {ALL FALSE} So finally I told them to connect my (their) old modem back up. Their modem worked fine.
As I was getting ready to pack my new Linksys modem up to send it back to Amazon. I decided to try it one more time. Following the exact sequence they used to connect their modem. And would you believe it? It works!!!
My problems:
1. bad tech support.
2. must remove router to register modem.
3. given wrong registration address. (MOST IMPORTANT)
4. computer must be turned off before you turn on modem.
Fool proof procedure to be up and running in 10 minutes:
1. Turn computer off.
2. If you have a router, take it out of the loop. connect directly from your computer to the modem thru the ethernet port.
3. Connect the cable.
4. turn on power to the Linksys modem, allow it to boot up.
5. turn on your computer
6. go to the registration page to register your modem. You MUST do this twice, for some reason it does not work the first time. MAKE SURE YOU GET THE RIGHT ADDRESS FROM AT&T. They failed to tell me I needed to use "https://" instead of "http://" it won't work without the "s"
enter your account # and registration #.
7. You should be working. Reconnect your router.

Click Here to see more reviews about: Cisco-Linksys BEFCMU10 Ethernet Cable Modem

If you're tired of the slow & frustrating performance of 56k modems & dial-up Internet providers, then your salvation is here in the form of the Linksys BEFCMU10 EtherFast Cable Modem. With a cable modem you are always connected to the Internet & you will experience speeds many times that of standard 56k modems. And it's easy to use. Just plug the plug-and-play device into any USB port on your PC. You can even plug it into your Ethernet port or an optional Linksys Router for easy Internet sharing through the home. Weight - 1lb.

Click here for more information about Cisco-Linksys BEFCMU10 Ethernet Cable Modem

Read More...

D-Link DE-805TP 10Mbps Ethernet Mini Hub 5-Port Review

Average Reviews:

(More customer reviews)Look -- I don't need a great hub. Obviously, this is definitely NOT something you'd want to support a major corporate network. When it comes to inexpensive home networking, though, this product is everything you'd ever need. Our 3-computer home network has never been jammed, we have never experienced any difficulties with the hub, and setup was a complete breeze. Just make sure you buy the right cables for the job (there's yellow patch cables, and regular ethernet cables -- talk to your local computer store representative to sort out this issue.. they'll know). I personally knew nothing about home networks before I decided to set up my own, but all in all I'm definitely glad I decided to use this inexpensive option to set up our network. You'll definitely appreciate the nice light up LED's which tell you when and where data is being transferred. Did I mention we even use the hub to give cable modem access to all 3 of our computers, with only one actual cable modem? Isn't that great?

Click Here to see more reviews about: D-Link DE-805TP 10Mbps Ethernet Mini Hub 5-Port

The DE-805TP is a five-port 10Base-T Ethernet hub that is ideal for very small workgroups on unshielded twisted-pair cables. This IEEE 802.3 compliant hub provides five RJ-45 ports for normal connection to stations and/or for cascading to another hub to increase the number of ports on your network. It comes with LED indicators for power and collision, plus one for each port to monitor the network activity and the link status between the port and the connected station. Lightweight and compact, this hub can be installed almost anywhere, even at sites with limited space.

Click here for more information about D-Link DE-805TP 10Mbps Ethernet Mini Hub 5-Port

Read More...

D-Link DUB-E100 USB 2.0 Fast Ethernet Adapter Review

Average Reviews:

(More customer reviews)I purchased this for my intel iMac with a non-functioning ethernet port. The adapter is automatically recognized and will hook to the network with zero configuration. Communication speeds are fast.

Click Here to see more reviews about: D-Link DUB-E100 USB 2.0 Fast Ethernet Adapter

The D-Link DUB-E100 is a Hi-Speed USB 2.0 10/100Mbps Fast Ethernet Adapter specifically designed to plug into an available Universal Serial Bus (USB) port on a desktop or laptop PC running Microsoft Windows XP, Me, 2000 or 98SE. Based on USB 2.0, the DUB-E100 extends the transfer speed of earlier USB Fast Ethernet adapters to true 10/100Mbps connectivity.As a USB device, the D-Link DUB-E100 eliminates the need to use an ISA, PCI, or PC Card slot to add LAN connectivity to a PC desktop or laptop computer. Installation and use are further simplified by living up to USBs out-of-the-box installation approach to connecting computer peripherals. You will not need to open the case of your computer, nor will you be required to set IRQs. The D-Link DUB-E100 represents the simplest way to connect your computer to an Ethernet based network.The D-Link DUB-E100 provides a standard RJ-45 connector for a quick and simple method of connecting to an Ethernet 10Mbps or Fast Ethernet 100Mbps based LAN via a network hub or switch. The built-in USB 2.0 cable connects directly to your computer or laptop.Power for the DUB-E100 is provided directly by the USB bus, eliminating the need for an external power adapter. It also supports USBs energy saving suspend and resume functions to minimize power consumption, which is especially useful for laptop/notebook users.

Get 59% OFF

Click here for more information about D-Link DUB-E100 USB 2.0 Fast Ethernet Adapter

Read More...

Belkin A3L791B10 CAT5E Patch Cable (10 feet) Review

Average Reviews:

(More customer reviews)This is not a booted cable as is pictured. This is just a cable with hand-crimped ends.

Click Here to see more reviews about: Belkin A3L791B10 CAT5E Patch Cable (10 feet)

10FT CAT5E PATCH CABLE

Get 33% OFF

Click here for more information about Belkin A3L791B10 CAT5E Patch Cable (10 feet)

Read More...

50 Ft Ethernet Network Patch Cable Cord Rj45 Cat5e Gray for Internet Routers and Gaming - Cable #E201403 LL109448 Review

Average Reviews:

(More customer reviews)The cable works great, just as well as our more expensive one. No problems and would recommend.

Click Here to see more reviews about: 50 Ft Ethernet Network Patch Cable Cord Rj45 Cat5e Gray for Internet Routers and Gaming - Cable #E201403 LL109448

This cable is the earlier version of the cable. The cable is actual copper verses the new ones which are copper clad version. This cable weighs about 30 percent more than the copper clad version. Any question on what this means - search Google for phrase "The American market was flooded with copper clad cable imported mostly". If the cable you purchase does NOT have E201403 and LL109448 printed on it, then you have bought a counterfeit cable. The advanced networks of today often require the use of high-speed cabling to distribute data, voice and video, and with our Cat5 Patch Cables you can stay ahead of the game. These cables will accommodate speeds of up to 350 MHz when connected to the appropriate hardware. Each comes UL verified to meet all Cat 5e TIA/EIA 568-A/B standards, and drastically reduces both impedance and structural return loss (SRL) compared to standard 100 MHz wire! This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to your termination point. Constructed with high-quality wire, and shortened body plug design keeps their Near-end Crosstalk (NEXT) levels to a minimum. This cable is available in a variety of colors for easy identification. 50 foot - Gray

Get 74% OFF

Click here for more information about 50 Ft Ethernet Network Patch Cable Cord Rj45 Cat5e Gray for Internet Routers and Gaming - Cable #E201403 LL109448

Read More...

Netgear MR814 802.11b Wireless 4-Port Cable/DSL Router Review

Average Reviews:

(More customer reviews)I've replaced my Linksys BEFW11S4 router with Netgear MR814, and I have not been disappointed. MR814 has a better range, better user interface, and several features missing from the Linksys model.
Setup was very easy - Netgear setup wizard even recognized the type of the broadband connection I have (PPPoE-based DSL). The manual includes a handy table with settings for many US ISPs. Wireless LAN was also up and running in no time.
I have no complains about the router operation so far. It's does not drop my PPPoE connection, and is generally *not noticeable* - just like a router should be.
Features that make this router stand out in the crowded field of wireless routers: 24x7 tech support and 3yr. warranty, parental controls plus free Zero Knowledge Freedom Personal Firewall software (one-year license for up to 8 computers), and ability to update your dynamic ip address in DynDNS.org database automatically (very handy if you need to connect to your home computer).
The only downside I can think of is the size. The unit is larger than many comparable routers, although it is not as tall as others, and can be positioned vertically with the included stand, or mounted on the wall.

Click Here to see more reviews about: Netgear MR814 802.11b Wireless 4-Port Cable/DSL Router

When you connect your cable or DSL modem to the Netgear MR814 wireless router, you'll enjoy wired or wireless Internet access for all your computers, and you'll be assured of protected communications on your home or small office network. This three-in-one router, switch, and wireless access point allows you to share your Internet connection, files, and printers with other computers on the network.

Click here for more information about Netgear MR814 802.11b Wireless 4-Port Cable/DSL Router

Read More...

Netgear DS104 4-Port 10/100 Dual Speed Hub with Uplink Button Review

Average Reviews:

(More customer reviews)I purchased this hub as part of a network starter kit (2 PCI ethernet cards + hub) and had no problems installing it. I run both Unix/Linux and Windoze machines and wanted all machines to be networked even with a mix of operating systems running at the same time -- and that meant simultaneous internet access, multi-player games, shared printers, etc. Basically, I wanted the network to do everything, so that any family member could sit down at a machine and do what they needed to do.
The DS-104 hub delivered from the time I installed it until the day I replaced it with a router (RT-314, also from Netgear). Installation was a snap, and as soon as I turned it on, I never had a moment's trouble from the DS-104.
So why did I switch? In two words, performance and price. Although the DS-104 is a fine product, its multiuser performance simply can't compare to a switch (which was built-in to the RT-314 router I replaced it with). I noticed that performance suffered when all of us wanted to use the computers simultaneously, which got me thinking about alternatives to improve performance. I initially intended to replace the DS-104 with a switch. After checking prices, I realized that I could actually purchase a router (switch + hardware firewall) for less than the cost of a switch alone. I eventually went that route, after receiving outstanding service from the DS-104 hub.
So was this purchase a throw-away? Hardly. The DS-104 did what it promised to do, reliably and without fuss. It handles both 10 and 100 Mbps connections transparently, so you don't even need to know the speed of whatever you're connecting. It's well-constructed (metal case instead of plastic) and absolutely reliable. Although I've replaced the DS-104 with a router, I haven't gotten rid of it -- I'm saving it for the day when I need to add several machines to the network and I'm out of ports on my router.
The DS-104 is solid, dependable networking at a very reasonable price. Recommended.

Click Here to see more reviews about: Netgear DS104 4-Port 10/100 Dual Speed Hub with Uplink Button

The Netgear DS-104 4-Port 10/100Mbps Dual Speed Hub connects multiple PCs to share printers, files, Internet access, and e-mail communications. You can mix and match 10 and 100 Mbps PCs, servers, and peripherals with this hub, all without any configuration required. The DS100 family combines many capabilities in a compact package and is designed for cost-conscious small-business users.
Each unit has a built-in self-learning bridge that provides the communications link between the 10 Mbps and 100 Mbps network devices. The intelligent bridge automatically manages network traffic so that 100 Mbps traffic and 10 Mpbs traffic do not unnecessarily crowd each other.

Click here for more information about Netgear DS104 4-Port 10/100 Dual Speed Hub with Uplink Button

Read More...

Cisco SD2008 8-port 10/100/1000 Gigabit Switch Review

Average Reviews:

(More customer reviews)Signifiant changes have occurred over the life of this switch. Version 1 had an internal fan and was quite noisy, albeit cool running. Version 2 & 2.1 eliminated the fan. However capacitor C251, sitting next to an internal heatsink is prone to failure after 6 - 8 months, resulting in dropped packets and link connections. Version 3.0 has solved this problem with a complete re-layout of the printed circuit board (PCB), with a redesign of the power/voltage regulation. The new version, still fanless, runs MUCH cooler than version 2.1.

Click Here to see more reviews about: Cisco SD2008 8-port 10/100/1000 Gigabit Switch

Harness the full power of your network with the Cisco SD2008 8-Port Gigabit Switch thatprovides nonblocking, wire-speed switching for your 10-, 100-, and 1000 megabit (Mb) network clients, all from the comfort of your desk. Formerly Linksys Business Series, now Cisco Small Business Unmanaged Switches, the SD2008 Desktop Switch allows the connection of up to 8 separate devices into your network - computers, printers, and servers - to share and transfer files and videos across your network.World-famous Cisco reliability and limited lifetime warranty gives you peace of mind.

Get 10% OFF

Click here for more information about Cisco SD2008 8-port 10/100/1000 Gigabit Switch

Read More...

Netopia Adsl 2+ Gateway 4PORT 10/100 Switch Firewall Security Review

Average Reviews:

(More customer reviews)Bought to upgrade from the adsl modem provided by AT&T (Wisconsin). Setup is easy. Type 192.168.1.254 into your browser. Enter an admin password for the router. Then enter your login and password for your AT&T DSL account. You're up and running in two minutes. If you've forgotten your AT&T login, call (877)-722-3755
--
Update 10/2010
The software appears to be the same as the Netopia 3346 modem, their basic business class modem (not the 3346-ENT, which has programmable software).
I took this router to my workplace to replace our dead 3346. Navigated to the Advanced Setup section in my browser. Configured the port mapping (what they call "pinholes") and ip routing for our needs and was back up and running in 15 minutes. The difference between this modem and the 3346 appears to be that it comes in a plastic case instead of a metal case, and the brand name is "Motorola" instead of "Netopia."

Click Here to see more reviews about: Netopia Adsl 2+ Gateway 4PORT 10/100 Switch Firewall Security

NETOPIA ADSL 2+ GATEWAY 4PORT

Get 42% OFF

Click here for more information about Netopia Adsl 2+ Gateway 4PORT 10/100 Switch Firewall Security

Read More...

Actiontec GT724WGR Universally Compatible 4-port ADSL Wireless Gateway (Gray) Review

Average Reviews:

(More customer reviews)Good thing for Rick V's review below. Otherwise I would have returned this great router.
If you are a Verizon DSL customer, it is possible that you can't connect immediately to the Verizon DSL service due to the WAN IP Lease expiration issue Rick described below. However, after disconnecting the old Westell modem and waiting for a few hours, the lease on the WAN IP had expired and the Verizon server had issued a new WAN IP to the new router. From that point on the auto-configuration worked like a charm. My advice:
1) don't call Verizon customer service - they are clueless about this issue
2) don't call Actiontec customer service - they told me that the router just does not work with Verizon
3) disconnect your old modem the night before your new Actiontec shows up. That way you are ready to go immediately.
Also, Rick V mentioned below that the router does not support WEP incryption, but only WAP incryption. That is actually not correct since the "Advanced Wireless Set-up Option" allows you to select what type of incryption you want.
Now that that's out of the way I can summarize as follows:
- Set up is really easy and fast (even for Verizon customers, if you follow my advice)
- Range is great. My router is located on the first floor and I still have 54 speed on the second floor in the opposite corner of the house
- documentation is good
- configuration is very intuitive
- just with any other g routers, you can get interference from 2.4 GHZ cordless phones. I would position router and receivers away from a phone basestation
- I was able to reclaim some space on my desk due to the integrated nature (modem and router) of this product
- the already great antenna can be replaced with one of your liking, if you feel inclined to do so (it is screwed on)
- the router is a little bigger than many other routers, but standing up it does not really matter
- it was easy to get to a life customer service person. However, they also did not know about the Verizon WAN IP lease issue
Hence, I can highly recommended this modem/router.

Click Here to see more reviews about: Actiontec GT724WGR Universally Compatible 4-port ADSL Wireless Gateway (Gray)

The Actiontec GS583AD3B-01 4-Port Wireless-G DSL Modem is a full featured wireless ADSL router modem that integrates a DSL modem, router, and wireless networking in one box. Simply connect this intelligent Actiontec GS583AD3B-01 4-Port Wireless-G DSL Modem to your DSL connection, then plug in your computers for an instant home network.The auto-configure tool does all the rest.So, share your broadband connection with anyone in your digital home and enjoy the ease, speed, and reliability of this powerful solution. The Actiontec GS583AD3B-01 4-Port Wireless-G DSL Modem has been rigorously tested to ensure compatibility with allmajor DSL providers.

Get 22% OFF

Click here for more information about Actiontec GT724WGR Universally Compatible 4-port ADSL Wireless Gateway (Gray)

Read More...

Qwest Actiontec M1000 DSL Modem Review

Average Reviews:

(More customer reviews)Having been an early adopter of DSL a decade ago, I was not too dismayed when the Cisco 675 modem that came with my Qwest (at the time, USWest) service sputtered and eventually failed. I bought this modem--the Actiontec m1000, branded for Qwest and sold as their "Broadband Starter Kit"--as a likely-sounding replacement. The swap was not without incident, which required a visit from a helpful Qwest technician (after a couple of hours on the phone with tech support), but that wasn't the modem's fault: Turns out Qwest had made upgrades since I had originally subscribed, and the new modem was never going to work until they upgraded my account accordingly. They did so, and since then the modem has worked flawlessly. I'd recommend it, though my sole DSL experience is with USWest/Qwest, so I have no way of knowing how it would handle other providers.

Click Here to see more reviews about: Qwest Actiontec M1000 DSL Modem

Fully tested and certified for Qwest DSL, the Actiontec EUADSL23C-08 Modular DSL Router for Qwest DSL is the industry's first modular DSL modem/router that offers a separate wireless networking upgrade via snap-in expansion module. You'll love this award-winning Actiontec EUADSL23C-08 Modular DSL Router for Qwest DSL for its ease of use, simple home network capabilities, and ability to share a broadband connection around the digital home. Purchase the Actiontec EUADSL23C-08 Modular DSL Router for Qwest DSL today.

Click here for more information about Qwest Actiontec M1000 DSL Modem

Read More...

Buffalo Technology AirStation Turbo G High Power Wireless Ethernet Converter ( WLI-TX4-G54HP ) Review

Average Reviews:

(More customer reviews)The WLI-TX4-G54HP is not perfect, but it is one of the best bridges out there. Unlike most bridges from Netgear, Linksys, and D-Link, the Buffalo Technology WLI-TX4-G54HP has 4 Ethernet ports built in, eliminating the need for a separate switch. This is key, since the advantage of a bridge versus wireless adapters is that one bridge can be used for multiple devices (e.g. in an entertainment center to support a TiVo, Wii, Xbox, Xbox 360, PS3, Slingbox, etc). The costly and time consuming alternative is to buy and configure a separate wireless adapter per device, one of which costs as much as the WLI-TX4-G54HP, and many of which don't even support the latest network security encryption.
Compared to other network equipment, setup was relatively straightforward. If you have a Buffalo router or access point, you can use one touch AOSS setup, which worked seamlessly, defaulting to the highest level of encryption supported by all devices (e.g. WPA-AES/CCMP). However, your AOSS settings on your Buffalo router default to supporting 125 High Speed if supported by all devices on your network which can cause issues on the WLI-TX4-G54HP (see below). Also, using AOSS to configure the converter disables any custom settings on your router such as disabling SSID broadcast (a highly recommended security practice), so you'll probably opt to configure your converter manually.
With Manual configuration you have the option of using the PC configuration software or the built-in web-based configuration tool. The only hitch with using the web-based configuration tool is that you have set your computer's wired Ethernet adapter IP address manually to 1.1.1.2 since the converter's IP address defaults to 1.1.1.1 and you have to be on the same subnet to connect to it since there is no built-in DHCP server (to do this, Right-click Network Places, click Properties, right-click your Local Area Connection, click Properties, click TCP/IP, click Properties, select Use the following IP address, and enter IP address 1.1.1.2 and subnet mask 255.255.255.0). Once you change your computer's IP, you can log into the tool, change the network and security settings and change the static IP address of the configuration tool to an IP on your subnet (e.g. 192.168.x.2) so you can manage it from any computer on your network. Don't forget to change your IP And DNS back on your computer back to automatic detection after you are done configuring your device.
On the downside, if you are using the WLI-TX4-G54HP in 125 High Speed Mode mode (aka g+ SuperSpeed, Gplus, HSM, SpeedBooster, Turbo G, Xpress, WME), which is only possible when used on a network with all 125 High Speed compatible devices, it freezes up and requires a power cycle when used under intensive bandwidth conditions, which I discovered when trying to transfer video between two TiVos connected to two WLI-TX4-G54HP converters and a Buffalo WHR-HP-G54 router (all of which support 125 High Speed Mode). This can be avoided by disabling the 125 High Speed frame bursting mode on your router. You will not experience this problem on a non 125 High Speed network (or even if you have a 125 High Speed Network with any non-125 High Speed devices on it since every device must support it to enable it).
Finally, if you have WDS-compatible router, such as any Buffalo router, you are better off using another WHR-HP-G54 router as a bridge since it provides the same functionality as the WLI-TX4-G54HP but also acts as a repeater to extend your network signal, and costs about the same price online. In fact, the WHR-HP-G54 looks identical to the WLI-TX4-G54HP, except that the latter lacks a WAN port and a switch to change from router to bridge mode. The only downside to using the WHR-HP-G54 as a bridge, is that doing so requires disabling 125 High Speed Mode on your router, but since this doesn't work well anyways, it isn't really a disadvantage.

Click Here to see more reviews about: Buffalo Technology AirStation Turbo G High Power Wireless Ethernet Converter ( WLI-TX4-G54HP )

Buffalo Technology AirStation Turbo G High Power Wireless Ethernet Converter ( WLI-TX4-G54HP )

Click here for more information about Buffalo Technology AirStation Turbo G High Power Wireless Ethernet Converter ( WLI-TX4-G54HP )

Read More...

Linksys RV0041 10/100/1000 4-Port VPN Router Review

Average Reviews:

(More customer reviews)I just wanted to extend my utter frustration with the RV0041 router. I spent more than $250 for this router, thinking it would be all I ever needed. Only a few months after owning it, the already LOUD internal fan started sounding like a jet engine. I contacted Linksys support and was sent a replacement through the RMA process. The unit I received worked for about a month or so now without a problem until now. It has started sounding like the other one. What piece of junk fans did they put in these things? I am getting rid of this and going with another brand. Now I am out $254, and I have to go spend money on a router.

Click Here to see more reviews about: Linksys RV0041 10/100/1000 4-Port VPN Router

Linksys (RV0041) CABLE/DSL 10/100/1000MPBS RTR

Click here for more information about Linksys RV0041 10/100/1000 4-Port VPN Router

Read More...

Cisco SD2005 5-port 10/100/1000 Gigabit Switch Review

Average Reviews:

(More customer reviews)Real quickly, I'm a network administrator for one of the largest websites in the US, so I'm not clueless when it comes to these devices. Like all the positive reviewers here, I was very happy with this unit when I first bought it. Worked like a charm, fast, cheap - what more could I ask for? Well how about a unit that didn't go belly up due to Linksys cutting corners on parts?
Apparently some versions of the SD2008 and SD2005 had fans, but they have been cut out. Now these little buggers overheat, and when they do, it can cause capacitors to go bad which basically kill it's ability to operate in gigabit mode. In fact, several of my computers (and I've tried all sorts of NICs/computer combos) just repeatedly drop connection in a neverending loop. Nice work Linksys.
I've read on forums that many others have the exact same problem - usually takes months for it to show up. One guy actually tore his apart, and saw the blistered/bulging components that had overheated and replaced them (hope you're handy w/a soldering iron.)

Click Here to see more reviews about: Cisco SD2005 5-port 10/100/1000 Gigabit Switch

The 5-Port 10/100/1000 Gigabit Switch provides non-blocking, wire speed switching for your 10, 100, and 1000 megabit network clients. Drop this switch in place of your current workgroup hub or switch, and you can upgrade your high-requirement workstations to full Gigabit speeds as necessary, while continuing to service other clients at their current speeds. Or build your network from the ground up, with appropriate link speeds for each users requirements. Either way, its perfect for graphics, multimedia, and other applications that have to move large files across the network quickly. With the 5-Port 10/100/1000 Gigabit Switch, you can connect your existing 10/100 Ethernet network to a Gigabit server backbone without any additional equipment.

Click here for more information about Cisco SD2005 5-port 10/100/1000 Gigabit Switch

Read More...

TRENDnet 5-Port Ethernet Switch (5 x 10/100Mbps Auto-MDIX RJ-45 Ports) TE100-S5 (Blue) Review

Average Reviews:

(More customer reviews)I found this product while looking for a way to split the LAN at my job into two. We get one ethernet cord running to our desk and that's it. I was worried that my company would have some kind of block to not allow this to happen (they don't allow streaming video, audio, etc... so they block a lot of things). I found the unit on sell (about half price) and decided it was worth the price to try it. I tried it at home at first and it worked great (I have a router at home, so don't really need this at home, but just wanted to make sure it worked at home so if it didn't at the office, then I'd know it wasn't the device). I unplugged the ethernet from one computer, plugged this in and plugged in two computers. So, basically, there was one ethernet cord going from the router to the TRENDnet box and two computers branched off from there. Worked great - no set up needed, just plug-n-play. So, now for the big test: I took it to work. Worked with no big problems - same plug-n-play. The only thing is that when I plug my computer directly to the work LAN, it says the connection at 1 GBPS, but through this device, it shows up as 100 MBPS. I can't really tell any problems so far with speed - everything is working as normal, but now I have online access on both my work computer and my laptop. So, for me, this device works as advertised and meets my needs.
PS - sorry for my non-technical review, but I'm no tech expert!
PPS - don't forget you'll need an additional ethernet cord to make this connection. I didn't think of it at first, but luckily remembered before I finished my transaction and was able to pick up a cheap 3-footer.

Click Here to see more reviews about: TRENDnet 5-Port Ethernet Switch (5 x 10/100Mbps Auto-MDIX RJ-45 Ports) TE100-S5 (Blue)

TE100-S5 is an Auto-MDIX switch designed specifically to boost network performance by eliminating network congestions and unnecessary network traffics. Each port on the Switch provides dedicated bandwidth and can negotiate between 10/100Mbps network speeds and half/full duplex modes. Plug and Play provides cost-effective and high performance solutions.

Get 60% OFF

Click here for more information about TRENDnet 5-Port Ethernet Switch (5 x 10/100Mbps Auto-MDIX RJ-45 Ports) TE100-S5 (Blue)

Read More...

TRENDnet 85Mbps Powerline Fast Ethernet Adapter Review

Average Reviews:

(More customer reviews)I bought this product to use with my Dish Network ViP622 and ViP211 receivers that have builtin Powerline capabilty. I just connected one TRENDnet adapter by my Linksys router and followed the DISH directions online with each receiver to discover my local network. I didn't install the suppplied TRENDnet software since I was only using one adapter to handle both my Powerline receivers.
It worked PERFECT all in less than 10 minutes, thought I had to plug one receiver straight into an outlet, but the other connected fine going through a surge protector. In theory a no no since the data could get filtered as well. I guess that surge device wasn't filtering real well....

Click Here to see more reviews about: TRENDnet 85Mbps Powerline Fast Ethernet Adapter

The Powerline 10/100 Mbps Ethernet Bridge transforms existing power lines in your home or small office into a high-speed network solution.The Powerline Ethernet bridge meets Home Plug 1.0 compatibility, ensures privacy through 56-bit Data Encryption, and supports data rates of up to 85Mbps. Included software measures data performance and enhances network security.

Click here for more information about TRENDnet 85Mbps Powerline Fast Ethernet Adapter

Read More...

NETGEAR ProSafe 16-Port Fast Ethernet Unmanaged Plus Switch FS116E Review

Average Reviews:

(More customer reviews)The Netgear FS116E 10/100 network switch has great build quality and very low power consumption. The 2 units I purchased have worked flawlessly for over 6 months. The vlan support is a terrific feature for such a low priced switch and works as expected. Vlan configuration is through a small application on the enclosed CD and is easy to configure. With vlans, multiple subnets can be carried over a single ethernet cable. Highly Recommended.

Click Here to see more reviews about: NETGEAR ProSafe 16-Port Fast Ethernet Unmanaged Plus Switch FS116E

Gigabit Switching with Wireless-N for Faster Network Performance, Wireless-N technology for faster wireless speeds and range, Four Gigabit Ethernet ports deliver ultra-fast wired connections, ReadyShare provides fast and easy shared access to an external USB storage device, Live Parental Controls powered by OpenDNS blocks unsafe internet content and applications, Broadband Usuage Meter ensures daily, weekly and monthly measurement of Internet traffic with customized alerts.Features: Multiple SSID support - set an additional wireless network for guests with restricted access to other computers in your network , Smart Wizard installation CD and multi-language support make setup easy, Automatic Quality of Service (QoS) for reliable Internet, voice and gaming applications, Configurable as a wireless repeater for extending range, Push 'N' Connect and Wi-Fi Protected Setup (WPS) ensure a quick and secure network connection.NETGEAR Green Gigabit Ethernet conserves energy, Convenient on/off switch helps conserver energy , Packaging manufactured with at least 80% recycled materials.Open-source Router, Community and Development Partner program, Open-source Wireless-N router with Gigabit wired ports for Linux developers and open-source enthusiasts. Open-source community website and development Partner program with downloadable applications, user guide, forums, blogs and downloads at www.myopenrouter.com, High Performance Broadcom 480 MHz MIPS 74K CPU, 8 MB Flash and 64 MB RAM to even run business-class applications, Popular Linux Firmware-DD-WRT, Open-WRT and Tomato available on Open-source community website, NEW Development Partner Program-development partnership with several 3rd party software vendors to develop custom applications on WNR3500L. Please visit www.myopenrouter.com to join the partner program and see the custom applications that are released or under development.

Get 40% OFF

Click here for more information about NETGEAR ProSafe 16-Port Fast Ethernet Unmanaged Plus Switch FS116E

Read More...