Ayrstone AyrMesh Hub Review

Average Reviews:

(More customer reviews)Purchased this Wireless product and it took some doing placing the antenna on a roof mast and routing the cable down to connect to my office router. So when I got the Internet Signal at our cabin in the trees about a quarter mile away it was truly a rewarding experience.
Despite a clause in the Terms & Conditions for service fees, I was assured by the owner that this was intended for future products and not for the Ayre-Mesh Hub System.
Product Support is excellent and available quickly with some real congenial folks.
Forgot to purchase the cable necessary to mount the antenna so that delayed things a bit, and I have to check into lightening rods and protecting my computer from an errant lightening bolt strike, but guess it comes with the territory.
Another great feature is the ability to separate my home/office network from the public use easily by creating a separate name for the public network.
All in all a satisfying and cost effective solution to extending rural networks.

Click Here to see more reviews about: Ayrstone AyrMesh Hub

The AyrMesh Hub is the "building block" for the AyrMesh network. The first AyrMesh Hub (called the "Gateway") is connected to your existing high-speed internet connection (router) and distributes it via Wi-Fi up to half a mile away. Additional AyrMesh Hubs (called "Remotes") can then be deployed as to extend your network even further. All AyrMesh Hubs are automatically self-configuring using information from the AyrMesh Portal. If you are ordering the AyrMesh Hub as a Gateway (the first AyrMesh Hub, connected to your router) or you need to mount it further from your power outlet, make sure you order an Ethernet cable (or make your own Ethernet cable) long enough to reach from where it is mounted to the power supply. AVAILABLE IN THE U.S. AND CANADA ONLY - $10 EXTRA CHARGE TO SHIP TO P.O. BOXES

Click here for more information about Ayrstone AyrMesh Hub

Read More...

NETGEAR WPN802 RangeMax Wireless Access Point Review

Average Reviews:

(More customer reviews)Previous dead spots in my house are gone - replaced with 80+% signal strength and high speed. I was using a Netgear FWAG114 (dual-band b/g) but it couldn't reach everywhere. I have the WPN802 on the top floor of my house in a corner and it reaches everywhere without exception, even my backyard sitting on my porch at the opposite end of the house - which I couldn't do before.
Installation note: by default DHCP is not enabled - you have to perform the initial setup by setting the IP address on your PC and plugging it directly into the unit first - awkward - but it does work as the manual instructs you to do. Some people have complained about the blinking blue rotating lights on the top from the antennaes (who doesn't like blinking blue lights!), anyway, there is a cap (think of a pirate's eye patch without the head band) that fits over the lights if they bother you. Excellent - highly recommended.

Click Here to see more reviews about: NETGEAR WPN802 RangeMax Wireless Access Point

"With NETGEAR’S RangeMax Wireless Access Point (WPN802) dead spots become a thing of the past.Customers will enjoy high speed Internet access everywhere in their homes – not just when they are situated close to their wireless access point.RangeMax uses MIMO (Multi-In, Multi-Out) smart antenna technology to delivers up to 10 times** more wireless coverage and speed than standard 802.11g devices when used with a NETGEAR RangeMax wireless client, yet is fully compatible.Also compatible and provides enhanced performance for IEEE 802.11b and Super G? wireless client adapters.There’s no need to worry about unauthorized use of your network. Your RangeMax Wireless Access Point offers the safety 64-bit Wired Equivalent Privacy (WEP) technology with 128-bit encryption, as well as Wi-Fi Protected Access (WPA), Pre-Shared Key technology, Wireless MAC address authentication and VPN tunnel pass-thru.Smart Wizard? guides you through easy installation and setup. Just plug the WPN802 into your existing router andyou can instantly allows share a wireless Internet connection. The WPN802 is backed by Netgear’s 1-year warranty."

Click here for more information about NETGEAR WPN802 RangeMax Wireless Access Point

Read More...

Cisco WAP4410N Wireless-N Access Point - PoE/Advanced Security Review

Average Reviews:

(More customer reviews)I recently purchased two of these Cisco WAP4410N WAPs. The goal was to help my brother-in-law cover his large home with good quality wireless. Based on my experience doing previous WAP installations, my guess was that is would take between three and six WAPs to full cover his large house (which has lots of brick and steel) with good quality coverage. I was impressed that by strategically positioning the units I was able to cover the entire house with only two of these WAPs. The coverage consisted of three floors (one was a finished basement).
The setup of these units was simple, the firmware is stable, and configuration was straight=forward. Since they were setup they have worked flawlessly and required no further attention.
The only thing a bit unusual (for those used to Netgear, Linksys, etc.) is that you have to setup a Cisco account (no charge just register online) to be able to download firmware, etc. This ended being unnecessary because the firmware in the unit was up-to-date.
If you're looking for really good WAPs that support Wireless-N and have lots of configuration options (e.g., Mesh, Multiple SSIDs, etc.) I highly recommend this unit. It has a slightly higher price than other (consumer units) you can buy, but it definitely deserves the "business-class" label that Cisco gives it.

Click Here to see more reviews about: Cisco WAP4410N Wireless-N Access Point - PoE/Advanced Security

Why string cables across your workspace when clients can connect to your internal network using wireless technology? Formerly Linksys Business Series, now Cisco Small Business Wireless Access Points, the WAP4410N is an 802.11n access point that provides secure, high performance network access.You can now extend your wired network to mobile employees within the workplace to keep them connected and productive.

Get 33% OFF

Click here for more information about Cisco WAP4410N Wireless-N Access Point - PoE/Advanced Security

Read More...

NETGEAR WG102 ProSafe 802.11g Wireless Access Point Review

Average Reviews:

(More customer reviews)The NG102 works like it should--with one exception that I've found. If you set it up in Bridge Mode, it will NOT work with WPA security--you can only use the inferior WEP security.
WEP can be cracked in under 24 hours (the netgear helpfiles built into the WG102 setup pages even say this), but they still force you to use WEP security when bridging.
Additionally, Netgear's tech support is ABYSMAL. I have submitted several trouble tickets with questions, and it sometimes takes them TWO WEEKS to reply--and even then they did not give a reasonable answer to my question, they gave a stock answer to something I didn't ask. The user suport forum is much better, but you're not guaranteed to get any help there, either.
*** UPDATE: 12/27 - I'd like to downgrade this product to ONE STAR! ***
This access point would lock up at least once a day. The only solution was to unplug the power and plug it back in.
I found it had particular difficulty when trying to transfer files over the local network and when running internet speed tests (such as www.speakeasy.net/speetest). Somehow they seemed to confuse or overwhelm the access point, and it had to be hard-reset. Neither of those activities should have caused it any trouble at all--especially not this (much more expensive) "business-class" access point.
After spending way too much time troubleshooting the problem, I have finally given up and will return it.

Click Here to see more reviews about: NETGEAR WG102 ProSafe 802.11g Wireless Access Point

The NETGEAR WG102 ProSafe 802.11g Wireless Access Point provides a secure and reliable wireless network with enterprise-level functionality at a mid-market price.
Fast and Secure Fully compatible with the 802.11g wireless standard at 54 Mbps, with an optional turbo mode for a speedy 108 Mbps when used with supported NETGEAR adapters, the WG102 offers a network connection that is fast and widely compatible. As 802.11g is backwards compatible with 802.11b, you needn't worry about your computers with older network cards not working.
Your data is secure, as the WG102 complies with industry security standards for user authorization and wireless data encryption; 802.11i, WPA2-Enterprise technology will keep your wireless network secure and interoperable. Also supported is MAC address authentication with a 256-user Access Control List and VPN pass-through.
Bridge and Repeater Mode In addition to functioning as an access point, the access point can also be used as a bridge and as a repeater. Used as a bridge, the device allows you to connect two LANs wirelessly; as a repeater, your wireless signal's range is extended so even the remote corners of your home or office can be covered.
Smart Design and Easy Setup Thanks to support for the IEEE 802.3af-based Power over Ethernet (PoE) standard, the need for extra cables are eliminated and the access point doesn't have to be put near a power outlet. The Simple Network Management Protocol is supported, allowing you to use any SNMP-based network management software. NETGEAR's Smart Wizard browser-based interface makes setup a snap.
The access point comes with one detachable antenna. The NETGEAR WG102 ProSafe 802.11g Wireless Access Point is backed by a lifetime warranty (power supply is backed by a 3-year warranty).
What's in the Box WG102 Wireless Access Point, one 5 dBi detachable antenna, resource CD, power adapter, Ethernet cable, installation guide, and warranty/support information card.

Click here for more information about NETGEAR WG102 ProSafe 802.11g Wireless Access Point

Read More...

Cisco Aironet 1131AG - wireless access point ( AIR-AP1131AG-A-K9 ) Review

Average Reviews:

(More customer reviews)This review is primarily for home owners who are considering this device.
The Cisco Aironet 113x WAPs are solid, professional devices. The 113x's are very configurable, and provide an exceptional feature set, reliability and distance -- even in congested areas. BUT: they require a very tech savvy consumer to configure them properly.
Tech Notes:
- This devices does not include a DHCP server -- the default config uses the DHCP server on your wired LAN -- there is NO default IP address.
- If default configuration does not work, you will need to use the console interface -- you'll need a serial connection and understanding of telnet.
- Securing the device requires an understanding of the difference between WEP and WPA and use of hex keys (no ASCII)
If any of the above is confusing or scary, you might consider one of the Linksys WAPs (Linksys was recently purchased by Cisco). They tend to be more sensitive to traffic congestion and have lower range, but they are much easier to configure.

Click Here to see more reviews about: Cisco Aironet 1131AG - wireless access point ( AIR-AP1131AG-A-K9 )

Cisco aironet 1130ag wireless access point.

Get 16% OFF

Click here for more information about Cisco Aironet 1131AG - wireless access point ( AIR-AP1131AG-A-K9 )

Read More...

Cisco WAP2000 Wireless-G Access Point - POE Review

Average Reviews:

(More customer reviews)I bought this product to provide secure wireless services to our company network. I was pleasantly surprised that it has support for multiple SSIDs with tagged VLAN support (useful for creating a "guest" network for visitors, as well as a separate secure internal network). It supports WPA2-Enterprise, which I'm using together with Windows Server 2003 IAS to allow domain users to be authenticated to the network using their windows login automatically. I was fully expecting problems deploying this somewhat bleading-edge feature, but so far it's worked perfectly (aside from the hassles associated with Microsoft's poor group policy support for WPA2 in XP Pro). The unit has never requiring a restart since I installed it. The physical hardware seems well made also. I'm not using the POE support, because the range on this AP is good enough to allow it to sit in our phone room and cover the entire floor. Overall, this product feels like it's benefited from the Cisco influence, unlike some of Linksys' other recent efforts.

Click Here to see more reviews about: Cisco WAP2000 Wireless-G Access Point - POE

The WAP2000 is a Wireless Access Point ideal for small businesses that want to expand their existing wired networks or create new wireless networks for the workforce or guests. It features RangeBooster technology that is compatible to standard 802.11g but with a range up to two times farther and throughput by up to 35 faster. Unlike ordinary wireless technologies that are hampered by wireless signals that reflect off walls, ceilings, and other objects, RangeBooster uses these multiple signals with two smart receivers at each end (router or access point and client adapter) to boost range and throughput speeds. As a result, a RangeBooster solution reduces or eliminates wireless signal deadspots in offices and other buildings so users can connect to the network in more areas. The WAP2000 comes with 3 dBi antennas for increased power, also helping to extend the range of the Access Point.

Click here for more information about Cisco WAP2000 Wireless-G Access Point - POE

Read More...

NETGEAR Wireless-N Access Point Review

Average Reviews:

(More customer reviews)HI All,
The Netgear WN802Tv2 is an Access Point that is meant for an existing network that already has a router setup. In other words, you will need to have a wired or older wireless-g router in place before you can use this device for Wireless-N Connectivity.
Basics first:
Whats in the Box? Access Point, Ac Adapter, Ethernet Cable, Netgear CD, Quick Start guide, Warranty Card, and Stand.
Setup:
So begins the install and testing. I was mildly irritated when I read the quick start guide. Most of you that have routers with a 192.168.0.x address will be ok and can install this thing in a jiffy where as others that use different ip addresses like 192.168.1.x will have to go through a few extra steps as I did. Basically this access point comes configured with a 192.168.0.x address out of the box...therefore you must follow the quick start guide and first connect it to your computer with an ethernet cable to configure it. That being said, if your network provides 192.168.0.x addresses and you are not using 192.168.0.233 you should be ok to plug this in and set it up via your browser.
Once the IP situation is ready to go you simply open your web browser and go to the 192.168.0.233 ip address. Log in with the username and password on the quick start card and you are given access to setup the access point with your preferences. Here are some of the basics:
1. Upon Entry - Name of Access point and Country it is used in.
2. Time Zone and If you would like to use a internet time server.
3. IP Settings - you can manually assign it an ip address or have it use dhcp to get one from your existing router.
4. Wireless Mode - 11b, 11BG, 11NG - all at 2.4ghz (another disappointment).
Once you get more deeper into the setup you are able to go through a multitude of wireless options which include things like the broadcasting of your wireless id, security, quality of service etc. This access point does include Quality of Service settings for Wi-FI Multimedia (WMM) which basically provides preference to multimedia based content over the wireless network.
This access point allows for a good array of security settings and supports Wep 128/152bit, WPA, etc....it also adds support for Radius Settings which can be found in an enterprise environment.
Wireless Performance:
This is probably one of the hardest tests to run but I was able to get some results. I used a commonly known speed test site to test my broadband connectivity whilst using the Netgear access point. As background, I have about 15-20mbps download and 2mbps upload via Comcast. The speed test on this router was similar to what I have achieved on my D-Link and Apple Airport Extremes. For that it gets a 5/5.
Speed testing was not enough and now it was time to stream a hd quality movie from this device onto my ps3 from a mac.....this is probably where this access point will shine. I usually stream movies and get a bit of stutter here and there...so I wanted to make sure I tested a movie that I have played before. I started the the movie and saw a stutter for about one second...but once it started streaming it played on and I did not notice any of the usual issues. The WMM QOS does work (wi-fi multimedia quality of service). More testing will continue and I will update my review to indicate the good or bad.Now for my thoughts and opinion on the product:
The size of the device is nice and the look is perfect. The picture on the product page does not do it any justice. The LED's are perfectly light and not too bright...they wont take your eye out.
I like the documentation, it will allow any user from novices to advanced users to be able to get up and running quickly with this device....More advanced documentation is on the resource CD. Note...you do not need the CD to install the device as the quickstart will guide you in the right direction at the get go.
The price is high - If you are going to spend over $100 to buy an access point you are better off spending the same amount to buy a new router which has built in Wireless N abilities. Even if you dont need another router, you can buy one and use it as an access point.
NO 5ghz - Another negative - most wireless-n routers are now able to broadcast in 5ghz mode. This router does not have that ability...and again for something with this price point it should. You can also spend $10-20 more and buy a dual band router which broadcasts in both 2.4ghz and 5ghz modes. With all of the wireless around our homes and offices, it is a must to have the 5ghz band so our computers can run un-affected by other wireless devices such as cordless phones etc....
Wireless performance is on par with other products and the WMM-QOS features make this access point shine.
Last but not least - and this may be just for me - but I think that Netgear can make this device ship so that it can pick up a DHCP address from our existing networks. This way everyone that buys one is able to plug it in and get to setting it up. I have seen this done on a multitude of products and Netgear can surely adopt those feature sets. I am a little knowledgeable in these things, but for a home user I would not want them changing ip addresses on their computers and plugging routers into them...its a bit on the complex side.
I think there are many improvements to be had on this item and price is definitely one of them. While I like the performance of the wireless, I do not like other things, as stated above, thus my rating is on the low side.
3/5 for me....sorry Netgear.
NOTE: Yes, I received this product for free from Amazon...for which I am grateful. My review on the other hand is as HONEST as can be after using/testing for 2 hours. I am fortunate to be a member of the Vine but I try my best to make sure that anyone buying a product I have been given gets a honest and un-biased review/opinion. Thanks!

Click Here to see more reviews about: NETGEAR Wireless-N Access Point

Netgear WN802T-200 Wireless-N Access Point is a powerful and multi-functioned 11n Access Point. Netgear WN802T-200 Wireless-N Access Point is a Wireless Network device that delivers up to 6x faster speeds and 7x extended coverage than 802.11g devices. Netgear WN802T-200 Wireless-N Access Point supports home network with superior throughput, performance and unparalleled wireless range. To protect data during wireless transmissions, Netgear WN802T-200 Wireless-N Access Point encrypts all wireless transmissions through WEP data encryption and supports WPA/WPA2. Its MAC address filter allows users to select stations with access to connect network. Netgear WN802T-200 Wireless-N Access Point thus is the best product to ensure network quality for hotspots.

Get 38% OFF

Click here for more information about NETGEAR Wireless-N Access Point

Read More...

Wireless G Access Point with Srx (speed and Range Expansion) Review

Average Reviews:

(More customer reviews)This wireless access point worked well for about 2 months, but then it started to turn itself off & on sporadically. LinkSys tech support tells me that this is a normal behavior -- the unit might work for 1 hour, and then off for the next few hours, then again, on & off. I thought they would just replace the unit (since it is under warranty), but they wouldn't... they transfer instead to their technical support in India or Philippines... & would not replace the device saying that "when it doesn't work, it is a normal behavior..."

Click Here to see more reviews about: Wireless G Access Point with Srx (speed and Range Expansion)

The Linksys Wireless-G Access Point with SRX is the best way to add wireless capability to your existing home or small office network.
The Linksys Wireless-G Access Point with SRX lets you connect Wireless-G (802.11g), Wireless-B (802.11b), and new SRX-enhanced devices to your wired network so you can add PCs to the network without the cabling hassle. Create a "wireless bubble" in that hard-to-wire home or office space, and save the time, hassle, and expense of running cables. Plus, notebook PCs can travel around your home or office and stay connected wherever they go. The Wireless-G Access Point with SRX combines smart antenna technology with standards-based Wireless-G (802.11g) networking. By overlaying the signals of two Wireless-G compatible radios, the "Multiple In, Multiple Out" (MIMO) technology effectively doubles the data rate. And unlike ordinary wireless networking technologies that are confused by signal reflections, MIMO actually uses these reflections to increase the range and reduce "dead spots" in the wireless coverage area. The robust signal travels farther, maintaining wireless connections up to 3 times farther than standard Wireless-G. And the farther away you are, the more advantage you get -- the higher data rate and reflection-friendly technology can yield up to 8 times more throughput than Wireless-G in some situations. The access point avoids interference by dynamically switching to the clearest channel available. Even your standard Wireless-G and -B equipment will work better when communicating with an SRX-enabled access point.
Wi-Fi Protected Access (WPA/WPA2) protects your data and privacy with up to 128-bit industrial-strength encryption. You can use the MAC Address filter to decide exactly who has access to your wireless network.

Click here for more information about Wireless G Access Point with Srx (speed and Range Expansion)

Read More...

Linksys by Cisco WAP4400N Wireless-N Access Point - PoE Review

Average Reviews:

(More customer reviews)I read the prior reviews but went ahead and bought this on the advise of a friend who intalls wireless networks for a living and he uses this access point a lot. I am completly pleased with this Linksys product. When you plan to use it for what it is designed for, an Access point, and don't have any notions that it is anything more, it chugs right along. I ran CAT 6 cable, (keeping under 300 meters total length) and used the AC adaptor supplied to power the unit. It is ran off a Linksys wireless-N router and a 5 station Linksys Workgroup hub. I mounted it in the downstairs coat closet behind my TV room and turned on my laptop, found it, and connected. I then entered it's webbased setup utility and configured it to my liking, (WPA2 security to match my wireless router) and I works like a charm. I am writing this review on my laptop, in my bedroom, where my upstairs router alone could never reach. I now have full bar service all over my complete property, inside and out. It is just what was needed.

Click Here to see more reviews about: Linksys by Cisco WAP4400N Wireless-N Access Point - PoE

With the growth in high bandwidth applications, such as storage and video in the work place, network performance is essential. Wireless technology is no longer lagging behind wired performance. The Linksys Business Series WAP4400N Wireless-N Access Point answers your growing business' need for access, speed and security. Using the very latest wireless networking technology, Wireless-N (draft 802.11n), Multiple In, Multiple Out (MIMO) technology multiplies the effective data rate by overlaying the signals of multiple radios. The Linksys Wireless-N Access Point lets you connect Wireless-N (802.11n), Wireless-G (802.11g) or Wireless-B (802.11b) devices to your wired network so you can add PCs to the network with no cabling hassle. Power over Ethernet (PoE) support makes the Access Point easy to install. You can mount the Access Point anywhere, even without ready access to a power plug. With appropriate PoE support at the other end, you only need to run one cable to the Access Point to deliver both data and power. Operating Channels -11 North America, 13 Most of Europe (ETSI and Japan) Receiver Sensitivity -11.n 300Mbps at -69dbM, 11.g 54Mbps at -73dBm, 11.b 11Mbps at -88dBM Security -WEP/WPA/WPA2 WEP 64bit/128bit, WPA-PSK, WPA2-PSK, WPA-ENT, WPA2-ENT Linux Operating System System Requirements -802.11b, 802.11g, 802.11n Wireless Adapter With TCP/IP Protocol Installed Per PC, Switch/Router with Power Over Ethernet (PoE) Support Or PoE Injector when used with PoE & Web-Based Configuration Java-Enabled Web Browser Dimensions -Width 7.80 x Height 5.16 x Depth 7.80-inches (198 x 131 x 198 mm) Weight -0.84 pounds (38 grams)Please note: A new firmware, which resolves wireless connectivity issues and other known bugs, has been released on www.linksys.com.

Click here for more information about Linksys by Cisco WAP4400N Wireless-N Access Point - PoE

Read More...

NETGEAR WN802T RangeMax Next Wireless-N Access Point Gigabit Edition Review

Average Reviews:

(More customer reviews)My husband has a computer business and has purchased 5 of these devices for various customers. Each and every one of them have failed. Three of them within the 3 months Netgear will provide free support for and two of them after 1 year.
When they work they don't work so well, a lot of disconnects, and network not found. Working with support stated that too many wireless networks in a congested area will cause this. Understandable, but hardware failures are not understandable.
Out of the five of them, Netgear has replaced the three that failed withing the 90 period and they have been taken out of service since then. There were too many network disconnects to be useful.
When they fail the power light comes on, but nothing else. No network light when the cat5 cable is plugged into it, nor does the wireless work on the device either.
My husband made the mistake of purchasing them when they were fairly new and paid over 170.00 per. What a mistake. DO NOT PURCHASE THIS AS IT IS JUNK.

Click Here to see more reviews about: NETGEAR WN802T RangeMax Next Wireless-N Access Point Gigabit Edition

The NETGEAR WN802T RangeMax Next Wireless-N Access Point Gigabit Edition lets you easily set up a wireless network in your home so you can share a single internet connection with everyone in your household at speeds up to 300 Mbps. You can stream music and video, make internet phone calls, videoconference, and surf the web, all at the same time.
Easy Setup The WN802T makes it easy for even a novice to set up a wireless network: just plug the included Ethernet cable from your LAN into the device and insert the included CD into any computer on the network, which will provide step-by-step instructions. The WN802T offers a myriad of placement options by including a stand for vertical placement and also a wall-mount kit.
The WN802T employs a web-based interface for configuration for compatibility with any computer with a web browser. The firmware is also upgradeable via the web interface so you can be sure your access point will always be up-to-date.
New Technology Means Blazing Speeds and Backwards Compatibility The WN802T complies with the latest 802.11n draft specification which allows for speeds up to 300 Mbps; this maximum speed can be achieved when used with other TopDog devices. By utilizing MIMO (multiple-input, multiple-output) technology, the WN802T has speed and range far surpassing the older 802.11g standard. The preset antennas in the access point ensure that the device is always tuned for optimal performance, and NETGEAR's Wi-Fi Multimedia technology optimizes audio, video, and voice applications.
By using Gigabit Ethernet for the backend, you'll be certain that the access point is receiving data at the highest possible speeds, ensuring the 300 Mbps wireless throughput is not going to waste.
If you still have computers that use 802.11g or 802.11b, don't fret as the access point is backwards compatible with the older wireless standards and can be set so all your computers can connect to the network. The access point will automatically figure out the connection type and work accordingly.
Security Made Easy NETGEAR's Touchless WiFi Security makes it quick and easy to set up network security on a WiFi network by asking for a passphrase from the user. The WN802T supports WiFi Protected Access (WPA2-PSK, WPA-PSK), and 64-bit and 128-bit WEP encryption for 802.11b/g networks. Additionally, you can set security through MAC address authentication, allowing only authorized users onto the network. There is also support for 802.1x RADIUS support with EAP TLS, TTLS, and PEAP.
The NETGEAR WN802T RangeMax Next Wireless-N Access Point Gigabit Edition is backed by a 1-year warranty.
What's in the Box WN802T RangeMax Next Wireless-N Access Point, power adapter, Ethernet cable, stand, wall-mount kit, resource CD, installation guide, warranty/support information card.

Get 17% OFF

Click here for more information about NETGEAR WN802T RangeMax Next Wireless-N Access Point Gigabit Edition

Read More...

Netgear WAG302NA WAG302.PROSAFE 11ABG Dual Band Wireless Access Point Review

Average Reviews:

(More customer reviews)I bought three of these and have been struggling with them for 6 weeks. One day it all works great, the next there are many dropped connections ot you can authenticate with only one device at a time: I'm using all static IP's with WPA/PSK TKIP. Even when authenticated and connected with good signal cannot reach the LAN, cannot ping anything.
The tech support is dysfunctional: on hold repeatedly, never getting a resolution. One "escalated" case took 4 weeks to get an answer and the answer is that the WAG302 is NOT COMPATIBLE WITH WINDOWS CE 5.0 WIRELESS DEVICES! Well, be advised, it works no better with laptops and desktops.
If you have a lot of time on your hands, then try it out. I mean a lot of time.

Click Here to see more reviews about: Netgear WAG302NA WAG302.PROSAFE 11ABG Dual Band Wireless Access Point

PROSAFE DUAL BAND WLS AP 802.11A/B/G WAG302

Click here for more information about Netgear WAG302NA WAG302.PROSAFE 11ABG Dual Band Wireless Access Point

Read More...

D-Link DWL-7100AP Wireless Access Point w/SNMP, 802.11a/g, 108Mbps Review

Average Reviews:

(More customer reviews)It had the latest firmware and wireless protocols installed, and the web-based configuration interface has well organized pages of setup options. The Help pages are actually helpful. As with any networking device it is good to be a little familiar with TCP/IP so you can handle minor annoyances like giving your computer a temporary static IP address in the same subnet range as the DWL-7100AP so you can communicate with it during configuration (This is explained in the manual). Afterwards, I was able to change my computer back to dynamic IP addressing, and still access the configuration pages of the DWL-7100AP. It will work just fine right out of the box with default settings, but as with any wireless access point, better security can be had by creating your own SSID name, disabling broadcast of the SSID, changing the default user ID and password, using MAC filtering so that only your computers will be accepted by the access point, and enabling data encryption. The DWL-7100AP allows you to use two kinds of WPA encryption, which is much more secure than WEP. I highly recommend this product and it's well-written manual. Some users report having their connection dropped frequently. I found that interference from 2.4 Gigahertz portable telephones in my house was the culprit for dropped connections on the 802.11g band, which is in the same frequency band as the phones. Since I switched to the 802.11a band (5 Gigahertz) I very seldom have dropped connections from the DWL-7100AP.

Click Here to see more reviews about: D-Link DWL-7100AP Wireless Access Point w/SNMP, 802.11a/g, 108Mbps

D-Link, the networking industry leader, delivers another innovative and versatile solution in wireless connectivity with the D-Link AirPremierTM DWL-7100AP Wireless Access Point. This dual-band (2.4GHz, 5GHz), tri-mode (802.11a, b, g) Access Point provides the most bandwidth coverage available in an AP. Multiple wireless clients can connect to the DWL-7100AP using both A and G wireless standards and any of its 11 non-overlapping channels to transfer data at speeds of up to 108 Mbps. Network Administrators can easily integrate various wireless managements with the DWL-7100AP Wireless Distribution System (WDS), offering modes in AP, Point-to-Point Bridge, Point-to-Multipoint Bridges, AP Client, and Repeater, allowing users to gain controls beyond a sole AP.

Click here for more information about D-Link DWL-7100AP Wireless Access Point w/SNMP, 802.11a/g, 108Mbps

Read More...

NETGEAR WG302 ProSafe 802.11g Wireless Access Point Review

Average Reviews:

(More customer reviews)I purchased 3 of these APs with the expectation to replace 3 Cisco "b" APs and drop in. The setup used Radius for authentication which is claimed to be supported in both the online info and docs. After config (the web UI constantly has problems with cookies and forced you to re-login) the system would work. One quark was the IP address field for the radius server wouldn't accept more than one character in the forms. Up and running. However, upon reboot, the WG302 loses it Radius info and then cannot authenticate a client again. SHOWSTOPPER. After logging this with Netgear support - their response is this is an unsupported config and requires premium support. While this would be fine if it was a config issue, it's not ok given they claim support for these features and this was a required feature for purchase. They give no further support now.
I would HIGHLY recommend against the extra cost of this unit given it's buggy and has poor support. Config is difficult (I had to learn how to use the command line config), the upgrades are not well documented (they imply you have to import some obscure file with tftp - you don't but...), however the unit does have good range and works (No RADIUS of course) in a basic config.


Click Here to see more reviews about: NETGEAR WG302 ProSafe 802.11g Wireless Access Point

The NETGEAR WG302 ProSafe 802.11g Wireless Access Point provides a secure and reliable wireless network with enterprise-level functionality at a mid-market price.
Fast and Secure Fully compatible with the 802.11g wireless standard at 54 Mbps, with an optional turbo mode for a speedy 108 Mbps when used with supported NETGEAR adapters, the WG302 offers a network connection that is fast and widely compatible. As 802.11g is backwards compatible with 802.11b, you needn't worry about your computers with older network cards not working.
Your data is secure as the WG302 complies with industry security standards for user authorization and wireless data encryption. WPA and 802.1x is supported for mutual authentication so only legitimate clients can associate with RADIUS servers. Also supported is MAC address authentication with a 256-user Access Control List and VPN pass-through.
Specially designed for Voice Over IP With support for SpectraLink voice priority, the access point will automatically provide priority mechanisms on the wireless network for any voice calls. This provides businesses with a simple and practical solution for combining voice and data over one line.
Bridge and Repeater Mode In addition to functioning as an access point, the access point can also be used as a bridge and as a repeater. Used as a bridge, the device allows you to connect two LANS wirelessly; as a repeater, your wireless signal's range is extended so even the remote corners of your home or office can be covered.
Smart Design and Easy Setup Thanks to support for IEEE 802.3af-based Power over Ethernet (PoE), the need for extra cables is eliminated and the access point doesn't have to be put near a power outlet. Simple Network Management Protocol is supported, making the device compatible with SNMP-based network management software. It supports all popular 802.1x port-based authentication protocols and administrators can remotely configure and monitor multiple WG302s via FTP.
NETGEAR's Smart Wizard browser-based interface makes setup a snap. The access point comes with two detachable antennas; optional accessories can further extend wireless capacity and range. The NETGEAR WG302 ProSafe 802.11g Wireless Access Point is backed by a 3-year warranty.
What's in the Box WG302 Wireless Access Point, two 5 dBi detachable antennas, resource CD, power adapter, ethernet cable, wall mounting kit, installation guide, warranty/support information card.

Click here for more information about NETGEAR WG302 ProSafe 802.11g Wireless Access Point

Read More...

Apple MA073LL/A AirPort Extreme Base Station Review

Average Reviews:

(More customer reviews)I have been using many wireless routers (Linksys, D-Link, SMC, Netgear, Siemens...) over the years, since the early days of 802.11b, but this is my first experience with an Apple router.
There is no need to comment on the manufacturing quality, design and packaging: in typical Apple fashion, they're miles ahead of the competition. For instance, unlike all the other routers I ever used that came with a 110v only power supply, the Airport Extreme Base Station (AEBS for short) comes with a universal worldwide power supply equipped with a standard power cord.
Performancewise, it is exceptional. I have been putting it through its paces over the past few days and it's barely breaking a sweat in situations where my previous routers (Linksys WRT54G and Netgear WGN824) would progressively get slower, or just plain crash and require a reboot. Coverage is excellent, better than my WGN824's which was already quite impressive.
Apple has traditionally be doing things differently, and it shows here again: unlike most routers, which are managed by accessing a built-in web server, this router can only be configured using the "Airport Utility" configuration program. The bundled CD contains a Mac OS X and a Windows version of the utility (I can already hear groans from the Linux geeks). The utility is extremely simple to use, although I haven't tried to use the more advanced features such as setting up another router like the Airport Express as a range extender.
One problem you might run into is the lack of support for "legacy" devices: although the AEBS offers a compatibility mode with WEP devices called "WEP (Transitional)" which lets WEP and WPA coexist, this mode imposes restrictions on the keys that may not work for you (for instance you won't be able to reuse an existing 40-bit WEP key). The problem is that WEP-40 and WEP-128 are not compatible with the 802.11n standard, so you have to choose between speed or full backwards compatibility. Also, you should know that WEP-40 and WEP-128 are not very secure: there are utilities out there that can crack these keys easily.
Note that 802.11n gives a significant speed boost to the AppleTV and laptops equipped with compatible cards (such as Apple's Core 2 Duo laptops with the 802.11n enabler installed -- you can find the enabler on the AEBS CD). Unless you own one of these machines, there is no harm in switching to a non-802.11n radio mode. How? Just hold the command key (or control on Windows) while clicking on the "Radio Mode" popup in the Wireless tab of the AEBS configuration utility. Extra, non-n modes appear in the list, and once one is selected the WEP-40 and WEP-128 modes become available under Security. If you select WEP-40 or WEP-128 security, you can enter a hex key by prefixing it with a dollar sign.
The AEBS also comes with a versatile USB port, which can be used to attach hard disks and/or a printer (USB hubs are supported). Unlike other base stations or NAS boxes, the AEBS does not require that you reformat the disk; all you have to do is plug it in and voilà! Instant NAS, all your files show up on the network. Some very basic access control features are provided. I plugged in the external USB drive I use to backup my MacBook, and now I can do automated backups without having to worry about remembering to plug in the drive: it just works wirelessly. The AEBS also lets you share a USB printer.
In conclusion, this router is a fantastic performer. Although it's one of the most expensive 802.11n routers out there, its feature set, build quality, performance and top-notch customer support more than make up for the price difference. I recommend it highly.

Click Here to see more reviews about: Apple MA073LL/A AirPort Extreme Base Station

Apple has updated its highly rated wireless router with faster speed, twice the range, a lower price, and wrapped it all up in a whole new design. The new AirPort Extreme Base Station now has extra Ethernet ports for making wired computer connections and/or sharing network printers. It even has a USBslot, for connecting a USB printer, external hard drive, or other USB device. Also, it works with both Mac and Windows machines.
About 802.11n AirPort Extreme Base Station is compatible with the 802.11n draft specification, the new, all-but-finalized (as of February, 2007) standard for wireless networking, or Wi-Fi. Apple says their 802.11n is up to five times faster than the currently ubiquitous 802.11g. It uses three discreet antennas that not only double its range over previous AirPort base stations, but allows up to 50 simultaneous connections. Unless you're an office manager, school principal or a cafe owner, you probably don't care about that much capacity. Still, it's nice to know you can, say, telecommute over the Internet while someone else in your household is streaming video without slowing each other down. Thankfully, AirPort Extreme is backward compatible with 802.11a/b/g devices. Apple does caution, however, that "speed and range will be less if an 802.11a/b/g product joins the network."

And while setting up a Wi-Fi network in your home can often be a confusing, frustrating experience, consumers have learned that Apple is adept at painlessly guiding even novice users quickly through a set-up process. Apple promises that their wizard will have you up, running, and secure in the time it takes to brew a cup of coffee. It offers WPA/WPA2 and 128-bit WEP encryption, as well as a built-in firewall, which helps protect you from Internet intruders.


Sharing Features One of the most interesting features of the new AirPort Extreme Base Station is its ability to turn almost any external USB hard drive into a network attached storage (NAS) device. Just plug the disk directly into the AirPort Extreme Base Station's USB port, and it will be accessible through the built-in file sharing capabilities of both Windows and OS X. The AirPort Disk Utility software helps you set up permissions and passwords, keeping the disk (or parts of it) inaccessible from others on your network. You can similarly turn a standard USB printer into a network printer. The AirPort Extreme Base Station only has one USB port, but you will be able to plug both of those devices and more in by using a separately sold USB hub. Like most wireless routers, AirPort Extreme Base Station lets you create a list of devices allowed to access your network. A new parental control feature in this router, though, lets you lock out specific devices, like a kid's computer, from connecting during certain hours of the day, such as after bed-time.

What's in the Box Apple MA073LL/A AirPort Extreme Base Station, AirPort Utility for Mac and Windows, AirPort Disk Utility for Mac and Windows, 802.11n Enabler for Mac, Bonjour for Windows, power cord, printed and electronic documentation.

Click here for more information about Apple MA073LL/A AirPort Extreme Base Station

Read More...

Microsoft Broadband Networking Wireless Base Station Router MN-500 Review

Average Reviews:

(More customer reviews)I love gadgets and technology, but I am NOT a computer expert and wireless networking terms such as MAC numbers and Port Forwarding and DMZ are pretty foreign to me. I just wanted a wireless way to share my broadband internet connection between our home office desktop, my PDA (iPAQ 5455) and our kitchen/family room based laptop. The Microsoft MN 500 Wireless Base Station is the ticket to easy wireless networking. All you really need to read is the 4 page quick start guide and the device will be up and running. I read the very informative 100 page manual as well and learned a thing or two, but I really didn't need that informtion. The base station connected flawlessly -though I did reset my cable modem after connecting. That is not in the instructions but my ISP told me it would be a good idea. The base station has worked perfectly since and the signal is very strong throughout my house, upstairs and down- and in fact even in my driveway outside (so I was certain to leave the built-in encryption feature on to prevent drive-by theft of my signal.) My base station is tucked into a cubby hole in my computer desk next to the cable modem and has no problem sending its signal throughout the house. Those who have had problems with the signal probably just need to move the device. There is a lengthy discussion about placement of the base station in the manual (away from metal computer cases, for example). The MN-500 also comes with a hardware firewall. There is much debate as to whether software or hardware firewalls are best. I'm testing. The first two weeks I had my base station I disabled the hardware firewall and continued to use my Norton software based protection. Now, I've disabled that and am using the MN 500 alone. The ease of installation and the firewall and encryption features make this a great product for people who want to share the internet at home but don't want to learn the inner workings of wireless.

Click Here to see more reviews about: Microsoft Broadband Networking Wireless Base Station Router MN-500

The Microsoft wireless router is the ideal central access point for your wireless network. Connect multiple computers to a single broadband connection. Roam your house or office with the freedom and mobility of a Wi-Fi equipped laptop computer, share files and printers with all the other computers on the network, or play games with multiple players on the Internet and within your own network.
Features include an easy-to-use setup wizard, designed to make connecting your computers together easier. The router comes with strong security features, including a built-in firewall, Network Address Translation (NAT), and access control lists. The 4-port router easily connects to your network with universal plug and play for functionality such as voice messaging, video messaging, and games. You can also monitor your network status easily with Microsoft broadband network utility.
Included in the box with this wireless router are a stand (detachable), power supply cable, Ethernet cable, startup guide, user's guide, setup CD-ROM, and a blank floppy disk.
System requirements include: a computer with a network adapter to configure the router, an external broadband (cable, DSL, or other) modem with Ethernet port (not compatible with dial-up modems), Microsoft Internet Explorer 5.0 or Netscape Navigator 4.7 or later to view and use the management tools, and an available 120 V AC power outlet.
Additional requirements include: a computer running Windows 98, 98 SE, Me, 2000 Professional, XP Professional, or XP Home Edition, Microsoft Internet Explorer 5.0 or later(setup will install Internet Explorer 6.0 browser components, if necessary, but will not displace your primary browser), 28 MB of available hard disk space if you already have Internet Explorer 5.5 or 6.0 (132 MB of available hard disk space if you are installing Internet Explorer for the first time), a 4x or faster CD-ROM drive, and a VGA or higher resolution monitor.
Note: Not all Internet service providers (ISPs) allow the sharing of a broadband connection. Please check with your ISP.

Click here for more information about Microsoft Broadband Networking Wireless Base Station Router MN-500

Read More...

Wireless G Access Point w/ P.O.E. and Rangebooster. Review

Average Reviews:

(More customer reviews)I needed to wirelessly network a Brooklyn Brownstone approximately 45' long by 100 feet tall 4 floors. Initially started with the Netgear
RANGEMAX WIRELESS ROUTER Netgear RangeMax Wireless Router (WPN824)because of the advertised (last year Sept)
-MIMO (Multi-In, Multi-Out) technology boosts network performance with up to 10x the speed and 10x the coverage of Wireless-G
Result: Signal traveled straight up to the upper floor without a problem, but could not reach the rooms from the middle to the front of the house 2nd ,3rd ,or 4th floors (Comcast cable modem placed on the second floor back). Mysteriously connections would drop without reason from time to time. Theory Comcast equipment was causing that problem, too, wireless phone and fax interference too being the possible gremlins.

Phase 2-Linksys Wireless-G Range Expander WRE54G
used 3 Linksys Wireless G Extenders to act as repeaters on the upper floors. Could only manage to get a strong signal partially to the second floor but signal was intermittent. Could only link two extenders but the second, again dropped the signal intermittently and the dreaded `limited or no connectivity' message began. Observation proved these messages materialized while roaming-connecting to the second or third node (first node being Netgear WPN824). Though the signal was seen (in some cases very good) Netgear had a time issuing IP addresses past the first node.
Phase 3, after spending 1 whole day surfing the net for info. I decided to start anew....after much comparing and no reviews to go by. I decided on the Linksys WAP 200 because of its versatility and advertised signal strength - it could be an accesspoint, a repeater, or a bridge...and because I had the G extenders from Linksys that I became familiar with....
200AP2 Linsys WAP200
Setup 1- Continue the Netgear as the Ethernet to cable box, wireless access point, with DHCP server, using the 2 200's as repeaters. The main problem, after becoming familiar with the WAP200 was still the `Limited or no connectivity' message. I `trial and erred' the settings ,I observed a correlation between RIP and the error msg.I also noted the msg occurring much more on my older lap (XP home), vs my girl friends newer (XP) lap.
Setup 2- using the Netgear as the DHCP server, Ethernet to cable box SWITCH. One of the 200's would account for a wireless access point (located on the second floor, 2 ft from the Netgear), the other a 200 a Repeater (3rd floor hall...I added a Hawking Technology's HAI15SC,Hawking HAI15SC 15dBi Hi-Gain Directional Corner Antenna 2.4GHz Hi-Gain Wireless Corner Antenna, boosts your wireless signal strength from 2dBi (standard) to 15dBi to the second floor 200...didn't think I needed it). This configuration covered the whole house, there were a few low signal readings at the extreme ends on the 4th floor 3ft from the front window , which I intended to eliminate with the Linksys G Extender.
Which brings me to the only concern- AP Mode gives you the opportunity to use the 200 in either 1 of 3 modes
AP Mode Screen
Use this screen to configure the Access Point mode. The three available modes are Access Point, Wireless Repeater, and Wireless Bridge.
The 200 that was used as the wireless access point needed the MAC address of the 200 used as a Repeater (in Repeater mode-- max 3 MAC addresses). Adding the address of the second wap200 (as Repeater) was'nt an issue, all worked perfectly. When I added the MAC addresses of the G Extenders `Limited connectivity' messages again appeared, I tried various combo's including changing the order but always a problem...perhaps the repeaters have to be legit repeaters or WAP200's...anywho I found this interesting and will be taking the 3 extenders back to Best Buy
Conclusions-
overall I found the Linksys WAP 200 a really good product. I don't believe you have to know the nuts and bolts about networking to get the WAP200 up and running. The documentation will not be of help to a newbie, but if you google your concerns you may learn a thing or two. $124 is a really good price for the endless possibilities one could use this 3-in-1 wireless network product......btw I speed tested the connections, watched video (google video, Youtube) while roaming around the house and it never dropped a signal.
it is now 11-28-2008 and this product has been running non stop since the original review..
asH


Click Here to see more reviews about: Wireless G Access Point w/ P.O.E. and Rangebooster.

The Linksys WAP200 Access Point lets you connect Wireless-G (802.11g) or Wireless-B (802.11b) devices to your wired network so you can add PCs to the network with no cabling hassle. Power over Ethernet support makes it easy to install -- you can mount the Access Point anywhere, even without ready access to a power plug. With appropriate Power Over Ethernet support at the other end, you only need to run one cable to the Access Point to deliver both data and power. Of course, you can also use the included AC adapter if your installation point has power available nearby. Moreover, the integrated QoS features provide consistent voice and video quality on both the wired and wireless networks, enabling the deployment of business qualilty VoIP and video applications.

Get 10% OFF

Click here for more information about Wireless G Access Point w/ P.O.E. and Rangebooster.

Read More...

Cisco-Linksys WAP51AB Wireless Dual Band Access Point (802.11a + 802.11b) Review

Average Reviews:

(More customer reviews)The product works great! I have it in my basement and I can roam with my laptop to any room in the house and the performance is excellent!
Someone should be experienced in networking to fully take adavantage of the products features but the "step-by-step" guide would allow a novice to set it up just the same.

Click Here to see more reviews about: Cisco-Linksys WAP51AB Wireless Dual Band Access Point (802.11a + 802.11b)

Install an access point that protects your infrastructure investment without limiting you to a single type of wireless technology. The Linksys Instant Wireless dual-band wireless access point works simultaneously with both 802.11a and 802.11b wireless standards to bring you the ultimate in wireless freedom. This means you can enjoy the broadest spectrum of wireless networking without the worry of a costly upgrade later.
The dual-band wireless access point's high-powered antennas enhance reception and provide seamless roaming throughout your wireless network. An advanced user-authentication feature and security encryption of up to 152 bits give you the highest level of network security. It's easy to install and easy to use. With Internet browser-based diagnostics and a setup wizard, you're always in control.
Compact, lightweight, and power-efficient, the Instant Wireless dual-band wireless access point from Linksys is the perfect wireless networking solution, no matter which wireless networking standard you choose to use.
For more information on the differences between an Access Point and a Router with Access Point, see the following table:

Get 19% OFF

Click here for more information about Cisco-Linksys WAP51AB Wireless Dual Band Access Point (802.11a + 802.11b)

Read More...