Showing posts with label signal booster. Show all posts
Showing posts with label signal booster. Show all posts

Saturday, September 1, 2012

Alfa AWUS036H 1000mW 1W 802.11b/g USB Wireless WiFi Adapter With Original Alfa Screw-On Swivel 9dBi Rubber Antenna and Suction cup Window Mount dock Review

Alfa AWUS036H 1000mW 1W 802.11b/g USB Wireless WiFi Adapter With Original Alfa Screw-On Swivel 9dBi Rubber Antenna and Suction cup Window Mount dock
Average Reviews:

(More customer reviews)
This is a good little USB network adaptor and works as advertised.
Background: I have a Dell laptop with an internal network card. I travel a lot and use it in hotels and hot spots quite a bit. The signal I was getting on the internal card with its two internal antenna's was weaker then I would like and usually doesn't get a strong enough signal to maintain 54 Mbps speed. I was usually down around 11 Mbps in a hotel room. Sometimes I have had to move to a different room, move to a balcony, or a certain point in the room to get a signal at all. In one hotel room I checked signal right after checking in and I could only get a usable signal near the door holding the computer up near the ceiling. I had to walk around the hotel to find a group of rooms that I thought would work and then coordinate with he front desk on availability and change rooms.
I researched many options, reading reviews, etc. Most other options were more expensive or problematic, including modifying my computer to install an external antenna. I looked at USB cards with the mail plug that plug into the computer without using an extension, pcmcia cards with external antenna's, directional antenna's, etc. Most of the reviews I read were from kids "War Driving" but still shed some light on how well this card works.
What I got: I went with the Alpha because of good reviews I read, and the fact that I can remote locate it using an extension giving more options then one mounted to the computer. The unit looks pretty cheap being plastic. Nothing special. It came with the two antennas. I ordered the two extension cables. One is passive and one is active (active is required for longer extensions).
Functionality/Results: It works well. So far I have not been in a Hotel where I didn't get an 88% or better connection (signal strength) with 85 or 90% link quality or better, and more importantly a link with 54 Mbps speed. I get many more signals too, but that is not what I was looking for in most cases. I have tried it in a dozen or so hotels and played with outside signals a bit. There are a lot of them out there.
The ability to move the antenna 10 to 25 feet away could be useful to get it on a balcony, outside a window, get around a concrete wall, etc. but I haven't had to do that yet with the Alpha. Once in the Bahamas, using the computers internal card, I had to get out on a balcony with a 40 mph wind coming off the ocean that would knock over the laptop if I didn't hold on to it, to get a clear shot to the hotel main building where the router was located. I had to weather the salt spray and either had to hold the computer screen to keep it from swaying so I could see it or hold my wine glass to keep it from tipping over. I needed three hands and it was a tough decision as to which two things to hold. That is when I decided to order this card. I read about folks on sail boats running the Alpha up the mast and getting a signal 4 or 10 miles off shore and putting the unit in a zip-loc bag to keep it out of the elements.
If I had modified my computer for an external antenna, or gotten a pcmcia card with external antenna, I could have run coaxial cable to a remote antenna to get the same position benefits, but the signal losses are large that way and signal cuts in half with every few feet of coax. With this adapter the antenna is run right into the transmitter/receiver and there is no loss, however you still have the ability to remote locate it up high in a room, outside a window, on a balcony, etc. without the loss. You don't get the signal loss from a USB cable, although you do run out of power if run too far. 25 feet with the two supplied cables is plenty for me.
Power: The high power is meaningless and probably a lie. I think they are claiming equivalent radiated power with a good antenna to some poor antenna standard like the antenna's printed on a pcmcia adapter card circuit board or something. Anyway it is not really a 1000mW adapter, but it does work well. The allowable power output is somewhat complicated but is based on radiated power (the combined effect of the transmitter and antenna). Anyway a balance of output power, receiver sensitivity, and selectivity is what is important and this one does a good job. It gets quite warm too only having passive cooling (vents).
Antenna's: Like many folks have reported, the big antenna doesn't seem to work any better for me then the little one. Sometimes it will get a slightly stronger signal and more signals with it, but the link quality (signal to noise ratio) is worse. The little antenna has worked fine in all cases so far and just as well as the big one on comparison.
Software: The software installed easily for me with Windows XP and I have had no problems. The software is between OK to fairly nice. I can still enable my internal card and use it when the signal is strong and I don't want to carry the Alpha. I disable it when using the Alpha.
Works great. Hope it last a long time.
If you are looking for solutions for your home (or work) because of problems with range on your Wifi you might also try one of the homemade paper directional parabolic antenna's that you print off from the internet. They really work and also increase security if positioned properly by directing coverage to within your house and decreasing coverage outside. They work will with this unit too. Requires a router with external antenna(s). You can also put one on the antenna of the Alpha and beam signals between the router and the Alpha. Quite effective. You print out a template from the internet, cutout a couple pieces of paper, cover one with foil or aluminum tape, stick the parabolic template together to the flat sheet to form the shape, and position the unit on the antenna of your router. Just do a search on "DIY windsurfer parabolic WIFI antenna" as Amazon doesn't' allow links. Also watch one of the Vid's on it.

Click Here to see more reviews about: Alfa AWUS036H 1000mW 1W 802.11b/g USB Wireless WiFi Adapter With Original Alfa Screw-On Swivel 9dBi Rubber Antenna and Suction cup Window Mount dock

You asked for STRONGER WiFi and Extended Range and here it is. We have combined this high power Wi-Fi adapters with a powerful +9 dBi 15' 2.4GHz Hi-Gain folding antenna. Estimated range is (depending on environment) 1.2 mile (2km). It is compatible with almost all laptops and desktop, PCs and Macs. This kit also includes two antennas- one mini 5 dBi gain travel antenna, and one high gain 9 dBi antenna, as pictured. It is perfect to travel with and weighing less than 2 ounces and measuring 3.5 x 2.5 inches in size (8.5 x 6.3cm)This has a stunning 1000mw output power. So if you are looking for a device to connect to an outdoor 2.4 GHz antenna, such as on a boat or an RV, this is a perfect solution. Because this is a USB adapter, it works on any computer that has a USB port. this also works with Windows Vista, Linux (kernel 2.6.6 and later) and Macintosh (OS version 10.4). And the drivers for ALL of these operating systems are included on CD-ROM * Wi-Fi Certified* Includes 2 external antennas- a 2 dBi mini antenna, and an original Alfa 9 dBi antenna as pictured * Diagnostic LED indicator* Complies with 802.11g standard for 2.4Ghz Wireless LAN* Contains RP-SMA external antenna jack (2 external antennas is included)* Enterprise-class 64/128 WEP encryption, WPA, WPA-PSK, WPA2, 802.1X support* 54 mbps High-Speed Transfer Rate for 802.11g* High powered adapter- 1000mw output power* USB 2.0 and 1.1 compliant

Buy Now

Click here for more information about Alfa AWUS036H 1000mW 1W 802.11b/g USB Wireless WiFi Adapter With Original Alfa Screw-On Swivel 9dBi Rubber Antenna and Suction cup Window Mount dock

Read More...

Sunday, August 26, 2012

Wireless Extenders zBoost YX540 METRO Dual-Band Cell Phone Signal Booster (Black/Grey) Review

Wireless Extenders zBoost YX540 METRO Dual-Band Cell Phone Signal Booster (Black/Grey)
Average Reviews:

(More customer reviews)
I live in an area that is about equidistant between cell towers. My best signal strength in the house is 2 bars or less. I lost calls all the time, sometimes just because I pivoted while talking and placed my head between the phone and the tower. The lower level of the house is partially sub-grade and I can never rely on maintaining a connection.
This extender has solved all the above problems. I have a clear conversation now, but no increase in cell strength (still 2 bars), When I turned it on, the phone showed no bars and thought I was too close to the repeater, but reception was clear. Routine contacts have commented that my voice is not choppy as it was before. I can definitely recommend this product's signal boosting capacity.
INSTALLATION: Windows on 2 sides of the house showed the same cell strength. I chose one that was the easiest to string cable along the wall and placed the transmitter as close to mid-house as possible. I placed the antenna as high in the window as possible. Do clean the window before mounting the antenna. It took less than 10 minutes to unpack and install. The hardest part was unraveling the coaxial cable. Instructions are short and clear. The trouble shooting table consists mainly of being certain to have more than 8 feet between the antenna and the transmitter, otherwise they interfere with each other.

Click Here to see more reviews about: Wireless Extenders zBoost YX540 METRO Dual-Band Cell Phone Signal Booster (Black/Grey)


Designed for use in single-story urban homes, the Wireless Extenders zBoost Metro YX540 cell signal booster boosts indoor signal for all cellular mobile devices that use the 800 and 1900 Mhz frequencies--including AT&T,T-Mobile, Verizon Wireless, and Sprint (but not Nextel phones). The zBoost Metro enables you to take full advantage of your mobile phone's voice, data and Internet services, including 3G high-speed data, streaming video, instant messaging, sending pictures, and more.

Like the entire line of zBoost products, the zBoost Metro features patent-pending technology that protects the carrier network, and the wide radio wave beam width directional antenna receives signals from multiple cell towers. Easy to set up, simply attach the signal antenna onto a window in an area in your home that offers the best signal (using the included suction cups) and then place the base unit in the area of your home where you want to strengthen the cell signal (see an illustration of the zBoost setup).

Key Features and Specifications
Boost indoor signal coverage up to 1500 square feet
Compatible with all U.S. carriers and mobile devices using 800 & 1900 MHz (except Nextel/iDEN or 4G, 2100MHz phones)
Supports multiple users simultaneously
Increases voice and data transmission
Decreases dropped or missed calls
Perfect for single story settings--no outside antenna placement required, no vertical antenna separation needed
No cradle or connections to your phone
Extends phone battery life (uses less power when signal is stronger)
Protects the carrier network using patented technology
Networks: CDMA, GSM, GPRS, EDGE, EVDO, 1xRTT, UMTS, HSPA, 3G
Dimensions (base station): 5 x 7 x 1.25 inches

What's in the Box
zBoost Metro YX540 amplifier base unit, power supply, base unit antenna, coaxial cable (RG59-mini), signal antenna and mounting hardware

Setup Overview
Before placing a zBoost Metro in your home, make sure that you can place calls near the window or wherever you plan to place the Signal Antenna. zBoost can only bring signal into your home when signal reaches the Signal Antenna.

Using your cell phone, place a call near this location to confirm that enough signal is present to complete the call. If you can reliably make and receive calls at that location then zBoost can bring the signal into your home. If only one signal bar is displayed on your cell phone, indoor coverage will be limited to one small room.

Proceed through the following steps to set up the zBoost Metro:

Place the Signal Antenna on the interior of a window located in the area of best signal.
Determine the location that provides the strongest signal using the signal strength indicator on your cell phone. Find the location on the window that provides the most bars of signal strength. Before proceeding, make sure that the intended surface is clean and clear of any dust. Then choose the suction cup attachments appropriate for your setting (short or long), fasten to the Signal Antenna, and secure to your window.

In order to capture the strongest signal, you may do one or all of the following:

Move the antenna around the window--higher is usually better.
Use the long suction cup attachments provided, in order to create a greater angle in which to capture the signal. The suction cups must be vertical on the window.
For best performance keep the Signal Antenna 2 feet from any metal.

Place the zBoost Base Unit where you want to create a Cell Zone
Connect the Base Unit Antenna and coax to the Base Unit and place it where you need signal. For the widest possible signal area, it is recommended that you position the Base Unit near the middle of a room or mount it on an interior wall. This Base Unit uses an omni-directional antenna that delivers signal in a circular pattern around the antenna. The zBoost Metro does not require vertical separation; however, the Signal Antenna and Base Unit Antenna should have at least 8 feet of horizontal separation. Increasing separation of the 2 antennas will optimize zBoost performance.

The Base Unit can be mounted either directly on a wall or placed on a flat surface (e.g., a bookshelf, desk, end table, etc.). For best results, keep the Base Unit off the floor and at least 2 feet away from other cords, metal objects or other wireless devices such as wireless routers or wireless access points. The zBoost Metro performs best when there are no obstructions between the zBoost Base Unit and your mobile device.

Run the provided coaxial cable between the Base Unit and Signal Antenna
Use the provided RG-59 (mini) coaxial cable to connect the Signal Antenna and the Base Unit. Coaxial connections can loosen when the cable is moved. Be sure the connections stay hand-tight.

Connect the zBoost Base Unit to the provided power supply and plug into a power outlet
Upon initial power up, a solid green LED should appear indicating normal conditions. If a red light appears, adjustments may be needed.


Buy NowGet 35% OFF

Click here for more information about Wireless Extenders zBoost YX540 METRO Dual-Band Cell Phone Signal Booster (Black/Grey)

Read More...

Sunday, August 5, 2012

Alfa 1000mW 1W 802.11b/g USB Wireless WiFi Network Adapter With Original Alfa Screw-On Swivel 9dBi Rubber Antenna Review

Alfa 1000mW 1W 802.11b/g USB Wireless WiFi Network Adapter With Original Alfa Screw-On Swivel 9dBi Rubber Antenna
Average Reviews:

(More customer reviews)
We kinda bought this figuring it was "snake oil". Well, we were wrong...dead wrong! We plugged this into the Vista laptop, Vista found it and we were using it in less than 1 minute, and to our surprise it picked up our neighbor's router 1000 ft down the road and on the other side of his house! We used to get his signal intermittently on the laptop, but with this plugged in with the hi-gain antenna, we get 4 out of 5 bars! This is through tall, thick trees and a motor home!
When the first reviewer (I read)says it got her father in law's signal 1000 feet or yards down the road, she isn't lying!!!
I just put it on my Windows 7 desktop and it works just the same. I just plugged it in, and windows found it, installed drivers and it's fine.
I ALWAYS suggest going online for the latest drivers for any computer hardware, but this one seems to work fine off of Windows Vista and 7's proprietary drivers.

Click Here to see more reviews about: Alfa 1000mW 1W 802.11b/g USB Wireless WiFi Network Adapter With Original Alfa Screw-On Swivel 9dBi Rubber Antenna

You asked for STRONGER WiFi and Extended Range and here it is. We have combined this high power Wi-Fi adapters with a powerful +9 dBi 15'' 2.4GHz Hi-Gain folding antenna. Estimated range is (depending on environment) 1.2 mile (2km) Most common Wi-Fi devices (D-Link, Linksys, and Netgear) have power ratings of less than 50mW (milliwatts.) Our new Wi-Fi device is 10x as strong (1000 mW.) This adapter is what the WiFi world has been waiting for. It is compatible with almost all laptops and desktop, PCs and Macs. This kit also includes two antennas- one mini 5 dBi gain travel antenna, and one high gain 9 dBi antenna, as pictured. It is perfect to travel with and weighing less than 2 ounces and measuring 3.5 x 2.5 inches in size (8.5 x 6.3cm) This has a stunning 1000mw output power. So if you are looking for a device to connect to an outdoor 2.4 GHz antenna, such as on a boat or an RV, this is a perfect solution. Because this is a USB adapter, it works on any computer that has a USB port.this also works with Windows Vista, Linux (kernel 2.6.6 and later) and Macintosh (OS version 10.4). And the drivers for ALL of these operating systems are included on CD-ROM - Wi-Fi Certified - Includes 2 external antennas- a 5 dBi mini antenna, and an 9 dBi antenna as pictured- Diagnostic LED indicator - Complies with 802.11g standard for 2.4Ghz Wireless LAN - Contains RP-SMA external antenna jack (one external antenna is included!) - Enterprise-class 64/128 WEP encryption, WPA, WPA-PSK, WPA2, 802.1X support - 54 mbps High-Speed Transfer Rate for 802.11g - High powered adapter- 1000mw output power - USB 2.0 and 1.1 compliant

Buy NowGet 59% OFF

Click here for more information about Alfa 1000mW 1W 802.11b/g USB Wireless WiFi Network Adapter With Original Alfa Screw-On Swivel 9dBi Rubber Antenna

Read More...

Thursday, August 2, 2012

2000mW 2W 802.11 G / N High-Gain USB Wireless Long-Rang WiFi Network Adapter With Original Alfa Screw On Swivel 9dBi Rubber Antenna and Suction cup Window Mount dock Review

2000mW 2W 802.11 G / N High-Gain USB Wireless Long-Rang WiFi Network Adapter With Original Alfa Screw On Swivel 9dBi Rubber Antenna and Suction cup Window Mount dock
Average Reviews:

(More customer reviews)
As the happy owner of an Alfa AWUS036H 1000mW wireless adpater, I purchased the Alfa AWUS036NH 2000mW wireless adpater for my second computer expecting to be ecstatic.
Imagine my disappointment when I discovered that the 2000mW adapter has more difficulty finding, acquiring, and maintaining connections to wireless access points than does the less expensive, supposedly less powerful 1000mW adapter.
Regardless of the combinations of cables, antennas, computers, locations, and updated drivers I tried, the 2000mW adapter consistently found fewer than half as many access points and reported far lower signal strength than did the 1000mW adapter.
Assuming that I'd received a defective item, I contacted a customer service agent at DB Roth who politely handled my call and promptly shipped a replacement adapter.
Unfortunately the second AWUS036NH performed just as badly as the first. Since both 2000mW adapters had exhibited the same behavior and the 1000mW adapter performed perfectly (as has been similarly reported by other Amazon.com customers), I have decided to exchange the 2000mW adapter for the less expensive 1000mW adapter.
DB Roth customer service has been extremely helpful. In spite of a brief misunderstanding over shipping charges, Bianca in customer service deserves very high marks.
Sadly, I can't say the same for the Alfa 2000mW adapter.

Click Here to see more reviews about: 2000mW 2W 802.11 G / N High-Gain USB Wireless Long-Rang WiFi Network Adapter With Original Alfa Screw On Swivel 9dBi Rubber Antenna and Suction cup Window Mount dock

You asked for STRONGER WiFi and Extended Range and here it is. We have combined this high power Wi-Fi adapters with a powerful +9 dBi 15' 2.4GHz Hi-Gain folding antenna. Estimated range is (depending on environment) 1.2 mile (2km). It is compatible with almost all laptops and desktop, PCs and Macs. This kit also includes two antennas- one mini 5 dBi gain travel antenna, and one high gain 9 dBi antenna, as pictured. It is perfect to travel with and weighing less than 2 ounces and measuring 3.5 x 2.5 inches in size (8.5 x 6.3cm)This has a stunning 2000mw output power. So if you are looking for a device to connect to an outdoor 2.4 GHz antenna, such as on a boat or an RV, this is a perfect solution. Because this is a USB adapter, it works on any computer that has a USB port. this also works with Windows Vista, Linux (kernel 2.6.6 and later) and Macintosh (OS version 10.4). * Wi-Fi Certified* Includes 2 external antennas- a 5 dBi antenna, and an original Alfa 9 dBi antenna as pictured * Diagnostic LED indicator* 2.4GHz frequency band, MIMO (Multiple Input Multiple Output) * High speed transfer TX data rate up to 150 Mbps* Contains RP-SMA external antenna jack * High powered adapter- 1000mw output power* Compliant with FCC Part 15.247 for US, ETS 300 328 for EuropeImportant Driver Installation:If you get an error while Installing the Drivers press OK, then Exit. Then do the following:Right-click on your CD Drive and select ExploreFor Windows, double-Click on the application file in this folder (the file name atarts with "IS_AP_STA_RT2870......) then follow the installation instructions. For Mac and Linux open their folder and then run the application.Or you can got to the manufactures website, then click on "Support" and on the left side click on "Drivers" and download.

Buy Now

Click here for more information about 2000mW 2W 802.11 G / N High-Gain USB Wireless Long-Rang WiFi Network Adapter With Original Alfa Screw On Swivel 9dBi Rubber Antenna and Suction cup Window Mount dock

Read More...

Sunday, July 29, 2012

Alfa 9dBi WiFi Booster SMA OMNI-Directional High-Gain Screw-On Swivel Antenna for Hawking - HWP54G, HWR54G and HWBA54G Review

Alfa 9dBi WiFi Booster SMA OMNI-Directional High-Gain Screw-On Swivel Antenna for Hawking - HWP54G, HWR54G and HWBA54G
Average Reviews:

(More customer reviews)
Running speedtest.net to check data transfer speeds, there is only a slight speed gain using this booster antenna over the stock antenna supplied with my Hawking range extender. It works fine, it's as simple as unscrewing the stock antenna and screwing this unit on, but at least at the distance I am from the wireless router, I'm not sure it's worth the cost.

Click Here to see more reviews about: Alfa 9dBi WiFi Booster SMA OMNI-Directional High-Gain Screw-On Swivel Antenna for Hawking - HWP54G, HWR54G and HWBA54G

Replacing your WiFi antenna with This Alfa Antenna will significantly increase the range and strength of your WiFi signal. Our quality built omni-directional antenna is a direct replacement for the antenna that comes standard with your router, access point, VOIP device, or PCI card. Because it is omni-directional, no aiming is equired - it can send and receive WiFi in all directions. This Alfa antenna is stronger then the less powerful booster antennas offered by major manufacturers (Linksys HGA7S and HGA7T.) Installation is very easy - just twist off the factory antenna and twist on our Booster Antenna and you'll experience an instant jump in

Buy NowGet 65% OFF

Click here for more information about Alfa 9dBi WiFi Booster SMA OMNI-Directional High-Gain Screw-On Swivel Antenna for Hawking - HWP54G, HWR54G and HWBA54G

Read More...

Friday, July 20, 2012

Hawking Hi-Speed 54M Wireless G Router (HWR54G) Review

Hawking Hi-Speed 54M Wireless G Router (HWR54G)
Average Reviews:

(More customer reviews)
I got this one as a replacement for a wireless D-Link DI-784 router that was glitchy and could not be programmed at all. And this was quite a change! While this router is not too sophisticated in terms of either available wireless security protocols or some other features, it has everything one needs to create a home network, and more.
Namely, compared to similar wireless routers from better known brands (DLink, NetGear, Linksys) this one:
1. Is PROGRAMMABLE. That is, it does not stop working or deos not develop glitshes when you change modes and parameters. (Many others present you with a whole spectrum of glitches when you start changing default settings.)
2. Supports any Internet connections, not only cable/DLS. You CAN use it with a leased line, you CAN connect it to another router with a static address, etc.
3. You CAN assign it a static IP address, and it works. (MOST others don't.)
4. It does support opening additional ports for your special applications (such as IP telephony - see below), and it works. (Many others don't do it properly.)
5. You can switch the DHCP feature off, and the router still works. (Many others don't.)
6. VPN pass-through works, and one can really connect to your work networks from home without glitches.
SUMMARY: I have successfully set the router up so that it currently supports 3 wired computers, 1 wireless, and a Vonage IP phone router. I couldn't do it with other routers from manufacturers mentioned above, because all of them were glitchy and actually could not work with static IP addresses and/or other routers and/or DHCP off, etc.
All wireless features work fine, and the speed/range are acceptable. One can use a long WEP key (26 Hexadecimal characters), and communication is fast and stable.
For those who are interested in configuring IP telephony: Vonage offers great phone plans, but it currently sends you a regular Linksys router of of its own with 3 RJ45 ports and 2 phone ports. So IF you have more than 3 computers and/or computers using wireless, you need to set up TWO routers to work together. And I succeeded in doing this with the Hawking one. Namely, I have connected the Hawking HWR54G to the cable modem, and it is the "primary" router with DHCP enabled. All 3 wired computers are connected to it as well as the wireless laptop.
The "secondary" Vonage router is connected to the primary one using a STATIC IP address (outside of the range used by DHCP). That way you can guarantee that it will always have the same address irrespective of the number of reboots. This configuration makes it possible to MAKE calls, but not receive them, because the system (primary router) doesn't know where to send incoming call data packets, and also blocks some of the ports by default (firewall function).
So I opened the IP telephony ports on the Hawking router and set up re-routing of these data packets to the Vonage Linksys router at its static IP address. Also, I had to open port ranges used by Vonage by adding these to the list of custom applications. Ports to be opened on the router/firewall:
69-69 (Vonage 1)
5060-5063 (Vonage 2)
10000-20000 (Vonage 3)
All three apps should be checked.
That way the phone works both ways, i.e. you can receive calls as well!
On the negative side, the only thing that I noticed was as follows: from time to time (once a day if you work intensively for the whole day) the router can "hang", and wireless networking stops working. As soon as you unplug it and then plug it in again, it reboots, and everything works fine. Nothing else is needed (no computer reboots). Generally speaking, this is quite a good result compared to some other models, and I can live with it. Recommended.


Click Here to see more reviews about: Hawking Hi-Speed 54M Wireless G Router (HWR54G)

Hawking Technologies HWUN1 Wireless NUSB Network Adapter extends your wireless network 4 times and boosts your data throughput 12 times!It is capable of transferring data at up to 300Mbps.

Buy Now

Click here for more information about Hawking Hi-Speed 54M Wireless G Router (HWR54G)

Read More...

Wednesday, July 18, 2012

Alfa 2.4HGz 7dBi Booster SMA and TNC Panel High-Gain Screw-On Swivel Antenna for Routers or Network Card Adapters - Fits Linksys WRT54G, WRT54GL, BEFW11S4, WAP54G, WAP11, WSB24, WRT54GS and all 802.11g TNC connectors Review

Alfa 2.4HGz 7dBi Booster SMA and TNC Panel High-Gain Screw-On Swivel Antenna for Routers or Network Card Adapters - Fits Linksys WRT54G, WRT54GL, BEFW11S4, WAP54G, WAP11, WSB24, WRT54GS and all 802.11g TNC connectors
Average Reviews:

(More customer reviews)
Ok so i just tryed this out for like a week or so because i thought it would be better than the orginal alfa antenna that came with it.
I gusse i thought wrong... the orginal antenna that i had did better then this. But if its all you have it's pretty good.
So i say buy the item and try it out its cheap and good.

Click Here to see more reviews about: Alfa 2.4HGz 7dBi Booster SMA and TNC Panel High-Gain Screw-On Swivel Antenna for Routers or Network Card Adapters - Fits Linksys WRT54G, WRT54GL, BEFW11S4, WAP54G, WAP11, WSB24, WRT54GS and all 802.11g TNC connectors

Replacing your WiFi antenna with This Alfa Antenna will significantly increase the range and strength of your WiFi signal. Our quality panel antenna is a direct replacement for the antenna that comes standard with your router, access point, VOIP device, or PCI card. it can send and receive WiFi in all directions. This Alfa antenna is stronger then the less powerful booster antennas offered by major manufacturers (Linksys HGA7S and HGA7T.) Installation is very easy - just twist off the factory antenna and twist on our Booster Antenna and you'll experience an instant jump in. PLEASE NOTE THAT THE INCREASE IN SIGNAL STRENGTH DEPENDS MOSTLY ON YOUR ROUTER OR ADAPTER THIS HELPS TO BUT IT CANNOT TRANSMIT OR RECEIVE POWER THAT YOUR MODEM OR ADAPTER DOES NOT HAVE!!! IT JUST GIVES MORE RANGE NOT STRONGER POWER!

Buy Now

Click here for more information about Alfa 2.4HGz 7dBi Booster SMA and TNC Panel High-Gain Screw-On Swivel Antenna for Routers or Network Card Adapters - Fits Linksys WRT54G, WRT54GL, BEFW11S4, WAP54G, WAP11, WSB24, WRT54GS and all 802.11g TNC connectors

Read More...

Tuesday, May 29, 2012

802.11g USB WiFi Wireless Lan Adapter w/5dBi Antenna Review

802.11g USB WiFi Wireless Lan Adapter w/5dBi Antenna
Average Reviews:

(More customer reviews)
I had ordered a mini wireless USB adapter for 33 dollars thinking it was cheaper than the most.It did not work, it detected 2 connections and the quality of signal was bad.I was not able to go online with that adapter.I returned it and looked for a cheaper but more useful alternative.I found this after reading about Alfa antenna adapters.Alfas were more expensive (30-40 dollars) and I did not want to spend that much because I did not want to have a costly non-functioning adapter.I wanted to give this a chance instead since it was 12.99.If it did not work, it was no big deal.
WOW! It does work great.While the previous adapter detected only 2 networks, this detects 5-6 networks and the signal quality is good (60-80%.It stays connected at a decent speed.
I highly recommend this adapter for people who need more and reliable reception at a value price.
The only possible disadvantage of this adapter is its antenna protrusion.If you have preschoolers like I do, they might bump into it and break it.Apparently you can not have it all (perfect reception+ultra-compact design+good price) at once.
So far I am very happy with my purchase. Thanks to Amazon (for free super saver shipping) and the vendor.

Click Here to see more reviews about: 802.11g USB WiFi Wireless Lan Adapter w/5dBi Antenna

Specifications :Data Rate:IEEE 802.11b: 1, 2, 5.5, 11Mbps IEEE 802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps PSP X-link support Software AP mode support Security: WEP (64/128/256bit), WPA, WPA-PSK, WPA2, WPA2-PSK Supporting O.S.:Windows 98SE / ME / 2000 / XP / Vista Mac v10.3 and v10.4 and 10.5 Linux Kernel v2.6.6 and later

Buy NowGet 52% OFF

Click here for more information about 802.11g USB WiFi Wireless Lan Adapter w/5dBi Antenna

Read More...

Sunday, May 20, 2012

Wireless-N USB High-Gain Network Adapter With High Gain 5dBi Dipole Antenna - Comply with 802.11n 802.11g and 802.11b Standards Review

Wireless-N USB High-Gain Network Adapter With High Gain 5dBi Dipole Antenna - Comply with 802.11n 802.11g and 802.11b Standards
Average Reviews:

(More customer reviews)
I purchased this because cost was low and wanted something to increase range. Set up was not that difficult but did have to uninstall and re install twice to get it running properly on Mac OS. Issues I have found troublesome are: it drops the signal frequently and I need to re activate; the USB adapter part fits loosely into the USB connection (which may be the reason for some of the dropped signals but I have been diligent about keeping it secure since noticing this and still there are dropped connections); I am unable to use the other USB port while the device is in because it takes up too much space. However, when it is working I have found significant increased speed and range...I just wish it was a little more predictable.

Click Here to see more reviews about: Wireless-N USB High-Gain Network Adapter With High Gain 5dBi Dipole Antenna - Comply with 802.11n 802.11g and 802.11b Standards

Features: * 145% Performance * 150% Distance * High gain antenna detachable Specification: * RF Chipset: Ralink RT2720 * Mac/BB Processer Ralink RT2770 * Standard: IEEE 802.11b/g/n * Software AP supported * Interface: USB 2.0 and 1.1 compliant * Antenna Type: RP-SMA Jack Transmitter Power: - 802.11b: 25 ? 2 dBm - 802.11bg: 18 ? 2 dBm - 802.11b: 17 ? 2 dBm * Operating Range: Up to 500 meters (Depending on surrounding environment) * Frequency: IEEE 802.11b: 2.4~2.497GHz. IEEE 802.11g: 2.4~2.4835GHz * Modulation Method: IEEE 802.11b: DBPSK / DQPSK / CCK. IEEE 802.11g: BPSK / QPSK/ 16QAM / 64QAM * Data Transfer Rate: IEEE 802.11b: 1, 2, 5.5, 11Mbps. IEEE 802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps. 802.11n: 20Mhz up to 144Mbps, 40Mbps up to 300Mbps * Security: 64/128bit WEP (Hex&ASCII). WPA, WPA-PSK, WPA2, WPA2-PSK, TKIP/AES * CE FCC RoHS compliant Dimension: - Antenna length: 191mm - USB Adapter: 88mm x 26mm x 13mm Package Content: * 802.11n Wireless LAN USB Adapter * High Gain 5dBi Dipole Antenna * Driver/Manual CD Operating System: * Win XP/Vista 32/64-bit * Mac * Linux Warranty: 1 year

Buy Now

Click here for more information about Wireless-N USB High-Gain Network Adapter With High Gain 5dBi Dipole Antenna - Comply with 802.11n 802.11g and 802.11b Standards

Read More...

Monday, April 23, 2012

ERB9250 11N 300MB 11N Range Extender Removable Antenna 1 10/100 Review

ERB9250 11N 300MB 11N Range Extender Removable Antenna 1 10/100
Average Reviews:

(More customer reviews)
EnGenius ERB 9250 Range Expander
I feel it is necessary to give my review on the EnGenius ERB9250 2.4 GHZ 300 Mbps Wireless N Range Extender to help others like myself with bad wireless connections. 03-15-2011-update My Linksys WRT600N router blew the 2.4 Ghz circuit (5-6 years old), the 5.0 Ghz remained, but this is the signal that doesn't penetrate walls. I now have a new EnGenius ESR 9855G Wireless N, 2.4 Ghtz-only router. This is working fine. The remaining content is based on my Linksys WRT 600N wireless router. I have used in the past a Linksys WRE54G - G Range Expander b/g with a with a Linksys WRT54G router to the same location. I am currently running 300Mbps with an excellent signal. In the past my Linksys WRE 54 G range expander had a maximum 54 Mbps with a fair to poor signal strength, used in combination with the WRT600N router and a HP premium "N" adapter. This old setup ran typically 2-20 Mbps with a fair to poor signal.
I am technical average, below average or novice when it comes to wireless networking. After reading someone's comment maybe I'm an expert and just doesn't know it. I have spent hours enhancing locations, changing configurations, and praying for a decent signal. I have by pure accident discovered solutions to problems that no one ever addresses. I've come to the conclusion that the advanced techs out there work for the manufactures sales department and really don't understand wireless systems and their wireless routers. Very seldom can you actually talk with someone. If you do get a hold of someone, they seem to know a lot less than me, which is frightening.
I have a home office in a separate building from my home. The nearest exterior stucco wall to exterior stucco wall is 17 feet. I have my WRT600N (now ESR 9855G) wireless router in my family room which is a straight 49 feet from my EnGenius ERB9250 Range Expander in my office. The Range Expander is 7 feet from my computer. The signal is going through 3 walls with windows.
I am writing to help people like myself.
Number 1 -Important Things That All Web Sites Stress -you can just ignore. You REALLY DO NOT need to pay attention to: 1) line of sight (you shouldn't have obstacles) between the router and the range expander. They must be living in a tent, but I really don't know anyone that is so lucky as to not have obstacles i their way. DUMB LESSONS are important lessons or information I have learned creating a decent wireless network and is probably more information than what you need. DUMB MISTAKES are mistakes I made, but because of frustrations, and trying to think logically when I am tired and frustrated; these mistakes have eaten a tremendous amount of my time and were quite easy to fix.
Dumb Lesson #1 the 2.4 GHz setting is to broadcast all Wireless N, Wireless G, and Wireless B systems all at the same time on all this same frequency. REMEMBER THIS RANGE EXPANDER (WRT600N) IS USING ONLY THE 2.4GHz part of the Wireless Router, not the 5.0GHz. My new router only broadcasts in 2.4 GHz. I originally thought that 5.0 Ghz was only N systems, and 2.4 Ghz was only B or G systems, wrong. 2.4 can be for all three. A, B, G, and N are just standards. N is the most recent allowing higher transfer speeds and more unused frequencies. The frequencies are by far the most misunderstood.
Dumb lesson # 2, Misinformation is very prevalent even from known authorities. Just remember, this is part of the problem we all deal with and affects our judgment, when we try to make improvements to our wireless networks. The higher the frequency the more likely it will penetrate walls. This is the complete opposite from what all the wireless geeks say. 5.0 GHz will do better than 2.4GHz going through walls. This is straight from my engineer father-in law who helped put the lander on the moon. So ignore what is being said by so called experts, I am a wireless novice with real scientific information. 5.0 GHZ has less distortion from other electronic products in your home. Therefore it has a clearer less obstructed and distorted signal from other household devices. Items that can overlap the 2.4 GHz are: wireless telephones, remote controls, wireless game controls, microwaves, and many more. Ignore this concern. Using a wireless G router, my 2.4 GHz cordless phone blocked all wireless signals. I bought a new DECT 6.0 phone. No more problems. WHY 5.0 Ghz APPEEARS TO BE WORSE is that 5.0 Ghz takes an extremely large amount of power to go the same distance as 2.4GHz, which the best consumer wireless routers don't have. The router and adapters signals are really going around walls and through windows to best of their abilities. My need has been getting my wireless signal to a far distance with a decent signal and decent speed. The 2.4 GHz is the only way to go with the "N" standard setting allowing the faster transfer rates up to 300 Mbps and a much longer distance with a range expander. Maybe someday 5.0 Ghz wireless routers with be available with more power, but don't count on it with all the energy efficiency requirements.
For the WRT 600 N wireless router:
A) Get access to your router through the IP address using your web browser at 192.168.1.1, click on the "Wireless" button next to "Set Up" - Basic Wireless settings the 5.0 GHz setting the 3 bottom categories for Radio Band, Wide Channel, Standard channel set all of them to AUTO. The Basic Settings for the bottom 2.4 GHz are Standard 20 MHz, Auto, and Auto. Under the 5.0 GHz -Wireless Mode setting, set it to Wireless N, Network Name SSID to something similar to your original network you have chosen, such as Digital add underscore media so you know what name you are looking for "Digital_media" and your regular Network to "Digital".
B) Under 2.4 GHz set the Wireless Mode to "Mixed." "Mixed" allows everyone in your network to use your Wireless Network no matter what kind of adapter they have (a, b, g, and n) for their computer. This is probably the biggest mistake and most misunderstood setting.
Dumb lesson # 3, I learned that the Dual Wireless Adapters will LOOK FOR MORE THAN ONE NETWORK AT THE SAME TIME, hence the name DUAL.
C) You need to set up your wireless adapters that are dual G & N adapters on each computer to do just that, by going to Control Panel, "Network" or "Network and the Internet", you need to get into the network adapter setting. It is very easy in Windows XP and Windows 7, which is what I use. The web also has good details on doing this.
D) If you have a Wireless Router N router always use security at least WPA2-Personal and give each of your network users the password, set the encryption at "AES". It is easiest to use the same password for 5.0 GHz as well as 2.4GHz. Remember old "B and A" standard adapters don't allow encryption. If you are using Older Network Adapters in your network of computers you can't have a WEP or WPA security password. The old computers and adapters don't allow encryptions and won't be able to connect to you network. My new ESR 9855G router allows up to 4 accounts using the same setup and guest users. I enable an additional account with a simple password for my visiting clients and friends and then uncheck the additional account box when they leave so it doesn't disrupt the 4 users and 2 businesses at my home.
CONTINUEING
Dumb lesson #4, The real reason the N standard is important is the transfer rates and MIMO. MIMO (Multiple Input, Multiple Output) refers to the ability of 802.11n and similar technologies to coordinate multiple simultaneous radio signals. MIMO increases both the range and throughput of a wireless network.
Dumb Lesson # 5, My wife would come to visit in my home office (separate building) in the late morning to see how my day was going. When she left my wireless signal disappeared. I was beginning to think she was really from Venus. This went on for 2 months and had me totally baffled. Solution - when she came to visit me in the morning I had my sliding glass door closed to keep the heat in the office. In the late morning after warming up outside, she left my office by opening the sliding glass door and closing the screen door behind her and saying, "enjoy the nice weather outside." My wire screen door was blocking my signal. I went down to the hardware store and replaced my screen with a heavy duty pet screen material made of some tough durable synthetic rubber/fiberglass material and I had my solution and signal back. I also replaced 2 other screen doors in my house, because of this issue. The signal strength did improve significantly.
DUMB MISTAKES WHEN TIRED AND SETTING UP THIS WIRELESS RANGE EXTENDER
Dumb mistake #1, I tried to setup my Wireless ERB9250 Range Expander using the "Manual Configuration," I plugged the LAN connection into the back of the wireless router for a network connection. Then I tried to go to the ISP 192.168.1.2. Wrong you must plug it into the wired LAN connection in the back of your computer's wired LAN connection. I had to reread the booklet. The online booklet doesn't specify this.
Dumb mistake #2, When I resolved my dumb mistake #1, and plugged it into the LAN connection, I went to ISP 192.168.2 and it wouldn't connect. It just said Windows Internet Explorer connection is not available. After scratching my head a few minutes, it dawned on me that I had to connect to the wired LAN (Local Area Network), not the wireless LAN. So I disabled the wireless adapter and allowed the computer to connect to LAN with ISP 192.168.1.2 and then followed the directions in the booklet. Note: it may be easier to print out the setup booklet online at EnGenius web site than to read the small size 6 font in the booklet, especially at night (see the missing note on the...Read more›

Click Here to see more reviews about: ERB9250 11N 300MB 11N Range Extender Removable Antenna 1 10/100

The Wireless-N Range Expander works with most Wireless access points and wireless routers, and is compatible with Wireless-B, Wireless-G and Wireless-N devices so you'll get the benefits of increased coverage even with a mixed network. The EnGenius ERB9250 300Mbps Wireless-N Range Extender is the easiest way to extend wireless coverage in your home or small office without running cables. Just put the EnGenius ERB9250 300Mbps Wireless-N Range Extender in between your main access point or wireless router and the dead spot in your area that you want to cover with the wireless signal. The EnGenius ERB9250 300Mbps Wireless-N Range Extender is designed to "repeat" signals into the far, hard-to-reach areas of your home or office. Eliminating the need to run cables lets you build a wireless network in a most cost effective way.

Buy NowGet 14% OFF

Click here for more information about ERB9250 11N 300MB 11N Range Extender Removable Antenna 1 10/100

Read More...

Tuesday, April 3, 2012

1000mW 1W 802.11g/n High Gain USB Wireless G / N Long-Range WiFi Network Adapter - Dongle With Original Alfa 9dBi Rubber Antenna with magnetic base *Strongest on the Market* Review

1000mW 1W 802.11g/n High Gain USB Wireless G / N Long-Range WiFi Network Adapter - Dongle With Original Alfa 9dBi Rubber Antenna with magnetic base *Strongest on the Market*
Average Reviews:

(More customer reviews)
I couldn't get this Alfa aapter to work with my XP computer. It wouldn't connect to my Netgear wireless router or any other wireless router in the area. It kept displaying the error message "wireless LAN card not exist". But since this is a wireless adapter no LAN card should be needed. Also, the router signals it displayed as being available were no more than my regular adapter on my other PC gets, so this product didn't seem to offer any long range advantage as claimed. The seller, DBRoth, gave me a full refund so I will give them a good rating, but the Alfa adapter seemed useless to me.

Click Here to see more reviews about: 1000mW 1W 802.11g/n High Gain USB Wireless G / N Long-Range WiFi Network Adapter - Dongle With Original Alfa 9dBi Rubber Antenna with magnetic base *Strongest on the Market*

This is an 802.11n wireless USB adapter with a maximum output power of 1 watt (that's 1000 mW). This is a single band (2.4 GHz) 1T1R 802.11n adapter with maximum transfer speeds of 150 megabits per second (mbps). This is for one brand new (in retail box) AWUS036NEH wireless adapter with 5 dBi gain antenna. Also included in the retail box is the installation software on CD.The AWUS036NEH hooks up to any computer that has a USB port and one of the compatible operating systems listed above. It allows you to get a long ranges and 802.11n connectivity. It is perfect for netbooks, laptops, and desktops. It features an external RP-SMA connector which is a must have for RVers or boaters that need a high powered USB Wi-Fi receiver to connect to a high gain outdoor antenna they already own or plan to buy.* Compatible with IEEE 802.11n, 802.11b/g/n wireless standards* 2.4GHz frequency band, MIMO (Multiple Input Multiple Output)* Complies with Universal Serial Bus Rev. 2.0 specifications* High speed transfer TX data rate up to 150 Mbps* Supports WPS by S/W* Supports wireless data encryption with 64/128-bit WEP, WPA, WPA2, TKIP, AES* Wide Range coverage* Compliant with FCC Part 15.247 for US, ETS 300 328 for Europe* Works with Windows 2000, XP 32/64, Vista 32/64, Windows 7 32/64.Important Driver Installation:If you get an error while Installing the Drivers press OK, then Exit. Then do the following:Right-click on your CD Drive and select ExploreFor Windows, double-Click on the application file in this folder (the file name starts with "IS_AP_STA_RT2870......) then follow the installation instructions. For Mac and Linux open their folder and then run the application.Or you can got to the manufactures website, then click on "Support" and on the left side click on "Divers" and download.

Buy Now

Click here for more information about 1000mW 1W 802.11g/n High Gain USB Wireless G / N Long-Range WiFi Network Adapter - Dongle With Original Alfa 9dBi Rubber Antenna with magnetic base *Strongest on the Market*

Read More...

Wednesday, February 1, 2012

Alfa 9dBi WiFi Booster SMA OMNI-Directional High-Gain Screw-On Swivel Antenna for Netgear - FM114P, FVM318, FWG114P, MA311, ME101, ME103, WG302, WG311 and WG311T Review

Alfa 9dBi WiFi Booster SMA OMNI-Directional High-Gain Screw-On Swivel Antenna for Netgear - FM114P, FVM318, FWG114P, MA311, ME101, ME103, WG302, WG311 and WG311T
Average Reviews:

(More customer reviews)
I purchased this in hopes of getting a stronger signal on my WiFi. I did not see any improvement and am disappointed.

Click Here to see more reviews about: Alfa 9dBi WiFi Booster SMA OMNI-Directional High-Gain Screw-On Swivel Antenna for Netgear - FM114P, FVM318, FWG114P, MA311, ME101, ME103, WG302, WG311 and WG311T

Replacing your WiFi antenna with This Alfa Antenna will significantly increase the range and strength of your WiFi signal. Our quality built omni-directional antenna is a direct replacement for the antenna that comes standard with your router, access point, VOIP device, or PCI card. Because it is omni-directional, no aiming is equired - it can send and receive WiFi in all directions. This Alfa antenna is stronger then the less powerful booster antennas offered by major manufacturers (Linksys HGA7S and HGA7T.) Installation is very easy - just twist off the factory antenna and twist on our Booster Antenna and you'll experience an instant jump in.

Buy NowGet 65% OFF

Click here for more information about Alfa 9dBi WiFi Booster SMA OMNI-Directional High-Gain Screw-On Swivel Antenna for Netgear - FM114P, FVM318, FWG114P, MA311, ME101, ME103, WG302, WG311 and WG311T

Read More...

Thursday, December 29, 2011

1000mW 1W 802.11g/n High Gain USB Wireless G / N Long-Rang WiFi Network Adapter - Dongle With Original Alfa 5dBi and 9dBi Rubber Antenna *Strongest on the Market* Review

1000mW 1W 802.11g/n High Gain USB Wireless G / N Long-Rang WiFi Network Adapter - Dongle With Original Alfa 5dBi and 9dBi Rubber Antenna *Strongest on the Market*
Average Reviews:

(More customer reviews)
I'm using this dongle/antenna to connect my media server on the ground floor of my house to a wireless router, which is on the second floor and in the opposite corner of the house. I've used several laptops in this room with many different wireless adapters, as well as a previous media server with built-in wifi card, and all generally get about 2-3 bars (out of 5) of signal in this location.
When I use this product in the same room, and even with one of the same laptops, I get 5 bars of signal, and the utility app says the connection ranges from 98-100% quality! I've streamed all kinds of video content with this new dongle, including HD, and it is amazing how well it works, comparable to plugging directly into the router via ethernet. It also pulls in routers from all the neighbors' houses, which were previously invisible, so I guess we could have free broadband if we really wanted it. The reception is way better than I dared hope for, and I'd buy this product again in a second if I needed another wifi connection for some reason.
In addition, I was surprised at how easily I was able to install the driver, even on Vista. . . when was the last time that happened? I hadn't heard of this company, and I was hesitant to buy from some small company because I've experienced compatibility problems before with obscure drivers working with XP, Vista, even Mac OS. Not this time, I was up and running in a couple of minutes.
One note of caution: the high gain antenna is very long (about a foot) and about a half-inch thick, so it would be cumbersome if you're using it with a laptop or expect it to be portable or unobtrusive. This is not an issue for me, and I guess the size is what makes it so powerful, so it's not a problem with the product, just something to consider in advance.
*** UPDATE 7/15/10 ***
I had some trouble getting this to work when I installed it with a new Windows 7 machine. The driver disk that came with it only goes up to Vista, so I had to download a current version from the Alfa Network site ([...].). Once I installed the new driver, it worked as well as reviewed above. The tricky part was that Win7 recognized the device and the wireless network icon in the taskbar, networking control panel, etc. all said that it was working, even though it actually wasn't. Wish I hadn't been fooled by that, so I'm posting the above link to make it easier for the next guy (or gal).

Click Here to see more reviews about: 1000mW 1W 802.11g/n High Gain USB Wireless G / N Long-Rang WiFi Network Adapter - Dongle With Original Alfa 5dBi and 9dBi Rubber Antenna *Strongest on the Market*

This is an 802.11n wireless USB adapter with a maximum output power of 1 watt (that's 1000 mW). This is a single band (2.4 GHz) 1T1R 802.11n adapter with maximum transfer speeds of 150 megabits per second (mbps). This is for one brand new (in retail box) AWUS036NEH wireless adapter with 5 dBi gain antenna. Also included in the retail box is the installation software on CD.The AWUS036NEH hooks up to any computer that has a USB port and one of the compatible operating systems listed above. It allows you to get a long ranges and 802.11n connectivity. It is perfect for netbooks, laptops, and desktops. It features an external RP-SMA connector which is a must have for RVers or boaters that need a high powered USB Wi-Fi receiver to connect to a high gain outdoor antenna they already own or plan to buy. Compatible with IEEE 802.11n, 802.11b/g/n wireless standards 2.4GHz frequency band, MIMO (Multiple Input Multiple Output) Complies with Universal Serial Bus Rev. 2.0 specifications High speed transfer TX data rate up to 150 Mbps, Supports WPS by S/W, Supports wireless data encryption with 64/128-bit WEP, WPA, WPA2, TKIP, AES, Wide Range coverage, Compliant with FCC Part 15.247 for US, ETS 300 328 for Europe, Works with Windows 2000, XP 32/64, Vista 32/64, Windows 7 32/64.Important Driver Installation:If you get an error while Installing the Drivers press OK, then Exit. Then do the following:Right-click on your CD Drive and select ExploreFor Windows, double-Click on the application file in this folder (the file name atarts with IS_AP_STA_RT2870) then follow the installation instructions. For Mac and Linux open their folder and then run the application.Or you can got to the manufactures website, then click on Support and on the left side click on "Divers" and download.

Buy Now

Click here for more information about 1000mW 1W 802.11g/n High Gain USB Wireless G / N Long-Rang WiFi Network Adapter - Dongle With Original Alfa 5dBi and 9dBi Rubber Antenna *Strongest on the Market*

Read More...

Wednesday, December 28, 2011

GSKY High Power 500mW 27dBm 802.11b/g USB Wireless WiFi LAN Adapter With High Gain 7dBi Panel Antenna Review

GSKY High Power 500mW 27dBm 802.11b/g USB Wireless WiFi LAN Adapter With High Gain 7dBi Panel Antenna
Average Reviews:

(More customer reviews)
I can't believe how well this adapter works. I bought it for my ASUS netbook... the range on the wireless adapter isn't fantastic and won't work in our basement family room. (the batcave) Even my regular laptop only gets one bar in the batcave, but the netbook couldn't even pick up the signal from my router on the main floor. I tried a Belkin extended range wireless usb adapter. It was no better than the wifi adapter in the netbook and the driver install blew away the setup for the internal router in the netbook without warning. After a quick system restore, I repackaged and returned the Belkin and ordered the GSky with panel antenna. I just installed it in less than 5 minutes with no harm to my existing wireless adapter setup and the range is unbelievable. I am getting all bars (excellent signal) in the batcave. I can't wait to try it downtown to see how many signals I can get now. If you have a basement family room... this is the $20 answer to your problem. The range on this thing is fantastic and so is the price.

Click Here to see more reviews about: GSKY High Power 500mW 27dBm 802.11b/g USB Wireless WiFi LAN Adapter With High Gain 7dBi Panel Antenna

500mW High Power WLAN USB adapter fully supports the features and functional compliance of IEEE 802.11b/g standard. It enables the deployment the latest updated WMMTM (Wi-Fi Multimedia). Our WLAN USB palm provides competitive price, high power and stable performance to PC & NB in wireless network world.

Buy NowGet 59% OFF

Click here for more information about GSKY High Power 500mW 27dBm 802.11b/g USB Wireless WiFi LAN Adapter With High Gain 7dBi Panel Antenna

Read More...

Thursday, December 22, 2011

Indoor 1W 802.11b/g Fixed-Gain Booster/Amplifier Signal up to 1500M Review

Indoor 1W 802.11b/g Fixed-Gain Booster/Amplifier Signal up to 1500M
Average Reviews:

(More customer reviews)
After exchanging the initial product with one that worked this product did improve the range of my WI-FI. The tech support was great on dealing with the exchange of the bad unit, although I did RMA through DBRoth instead of the manufacturer in the end because it was a quicker exchange. I am broadcasting about 1/4 mile with an external 19dbi antenna using a Linksys WAP54G. At the receiving end I used a second WAP54G with original antennas as a repeater. I tried using various other APs, the Cicso worked best but was more expensive than the Linksys. Others did not perform that well. Do not expect this to double or triple your reception. I saw a 20-30% improvement, which was what I needed. I also tested this product in my office with similar results, 20-30% signal boost. I used WISpy from [...] to test signal strength.

Click Here to see more reviews about: Indoor 1W 802.11b/g Fixed-Gain Booster/Amplifier Signal up to 1500M

WZ-2300-1W is an indoor solution 1W bi-directional Booster designed for 2.4GHz wireless LANs. This unit comes with an easy plug-and-play installation, which works together with an indoor Wireless Access Point to improve its operation range and performance. The unit is ideal for use with 2.4 GHz frequency hopping or direct sequence spread spectrum radio modems and 802.11b/g devices. The amplifiers increase range by providing transmit gain as well as low-noise receive gain. This receive gain increases the receive sensitivity of wireless LAN Access Point. Full output power of 1W is achieved with only 5 mW input into the Booster.

Buy Now

Click here for more information about Indoor 1W 802.11b/g Fixed-Gain Booster/Amplifier Signal up to 1500M

Read More...

Thursday, November 17, 2011

Ubiquiti BULLET-M2-HP Outdoor 802.11n 802.11g Review

Ubiquiti BULLET-M2-HP Outdoor 802.11n 802.11g
Average Reviews:

(More customer reviews)
Works great.....we are changing our whole system to these devices. The need better electrical protection.

Click Here to see more reviews about: Ubiquiti BULLET-M2-HP Outdoor 802.11n 802.11g

100Mbps+ of REAL TCP/IP Throughput over outdoor multi-km linksNo radio card / host board issuesNo RF cable quality concernsNo mechanical stability concernsNo enclosure mounting requirementsJust Plug and Go.Features Include:Processor Specs: Atheros SOC, MIPS 24 KC, 400MHzMemory Information: 32MB SDRAM, 8MB FlashNetworking Interface: 1 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet InterfaceApprovals: FCC Part 15.247, IC RS210, CERoHS Compliance: YESRF Connector: Integrated N-type Male Jack (connects directly to antenna)Power Method: Passive Power over Ethernet (pairs 4,5+; 7,8 return)Bullet does not include a PoE injector or power supply.Recommended DC voltage range is 10V to 24V.Datasheet

Buy Now

Click here for more information about Ubiquiti BULLET-M2-HP Outdoor 802.11n 802.11g

Read More...

Monday, November 14, 2011

USB to USB Mode 34mm ExpressCard Host Adapter for 3G AirCard ExpressCard AT&T Cingular Sprint Verizon Kyocera Marlin Novatel Sierra Wireless, NOT for PCMCIA PC card 54mm Review

USB to USB Mode 34mm ExpressCard Host Adapter for 3G AirCard ExpressCard ATandT Cingular Sprint Verizon Kyocera Marlin Novatel Sierra Wireless, NOT for PCMCIA PC card 54mm
Average Reviews:

(More customer reviews)
Bought this adapter for my Verizon Novatel PC770 modem, because my new Laptop did not have a PCMCIA or Expresscard slot.
Before I got the adapter, on my old laptop I never got more than 3 bars of signal, even with an external antenna hooked up. Now with the cable connected to the USB port, I get 5 bars of signal, which equals a higher data rate. It works so well, I'd recommend everyone buys it, even if you have PCMCIA/Expresscard slots, just for the signal improvement.
Note that the adapter only works with a modem that uses the USB mode of the Expresscard/PCMCIA interface. Problem is that no-one tells you how the card works. Guess the PC770 works via the USB mode because this adapter works perfectly.

Click Here to see more reviews about: USB to USB Mode 34mm ExpressCard Host Adapter for 3G AirCard ExpressCard AT&T Cingular Sprint Verizon Kyocera Marlin Novatel Sierra Wireless, NOT for PCMCIA PC card 54mm

NOTE: The DEVICE WILL NOT WORK WITH any ExpressCard using the PCI Express (PCIe) portion of the ExpressCard standard. This is the majority of ExpressCards that do any other than the devices discussed above. Any real host adapter for SATA, FireWire, Ethernet, USB 2.0, etc. WILL NOT WORK WITH the EXP-USB USB 2.0 to USB 2.0 Mode ExpressCard 34 / 54 Host Adapter. The EXP-USB USB 2.0 to USB 2.0 Mode ExpressCard Adapter allows use of USB based ExpressCards with USB 2.0 equipped computers. USB mode ExpressCards include: Novatel Wireless Merlin ExpressCards (XU870, EX720, V740), storage media ExpressCards The EXP-USB USB 2.0 to USB 2.0 Mode ExpressCard 34 | 54 Host Adapter provides 5V and should provide more than enough power to ExpressCards when plugged into a 500mA USB 2.0 port. Use with 300mA USB 2.0 ports is not recommended and may not provide sufficient current for certain ExpressCard applications. Using USB 2.0 technology, the device supports high speed applications including HSDPA and HSUPA ExpressCards. The EXP-USB USB 2.0 to USB 2.0 Mode ExpressCard Host Adapter is very small and lightweight, providing excellent portability.

Buy Now

Click here for more information about USB to USB Mode 34mm ExpressCard Host Adapter for 3G AirCard ExpressCard AT&T Cingular Sprint Verizon Kyocera Marlin Novatel Sierra Wireless, NOT for PCMCIA PC card 54mm

Read More...